FLYTOP VT25 4.9 / 5.8GHz VTX – 2.5W, MMCX

FLYTOP VT25 4.9 / 5.8GHz VTX – 2.5W, MMCX

2.5W 4.9G 5.8G VTX
$23.96
Sale price  $23.96 Regular price  $23.96
Skip to product information
FLYTOP VT25 4.9 / 5.8GHz VTX – 2.5W, MMCX

FLYTOP VT25 4.9 / 5.8GHz VTX – 2.5W, MMCX

$23.96
Sale price  $23.96 Regular price  $23.96
Color2.5W 4.9G 5.8G VTX

FLYTOP VT25 — 2.5 W on 4.9 and 5.8 GHz with an MMCX output — more range than a 1 W unit without stepping up to the 3 W class that needs forced cooling.

Specifications

Model FLYTOP VT25
Type VTX
Frequency band 4.9 / 5.8 GHz
Output power 2.5 W
Connector / input voltage See the variant you select — this listing covers more than one version

Before you buy

  • Confirm the input voltage of the exact variant you ordered before wiring it to a flight controller or BEC.
  • Never power a VTX without an antenna connected — the reflected power damages the output stage.
  • Check local RF regulations; high output power is not legal for general use in most countries.

In the box

  • 1 × FLYTOP VT25 transmitter
  • 1 × power / video harness
  • Antenna not included (MMCX connector)

Why this spec

  • 2.5 W on 4.9/5.8 GHz is a long-range power level on the band most goggles already receive.
  • MMCX connector is smaller and lighter than SMA, which matters on a build where every gram on the tail counts — but it needs an MMCX antenna or a short MMCX-to-SMA pigtail.
  • 4.9 GHz support lets you drop below the crowded 5.8 GHz channels when the site is busy.
  • Never power it without an antenna — at 2.5 W the reflected power destroys the amplifier quickly.

What you still need to complete the build

  • A matching antenna for the band, rated above your output power
  • A clean power source sized for the module's current draw
  • For VRX units: a display or goggle with analog video input

Support and returns

Every unit is checked before dispatch. If a module arrives damaged or does not match the specification table, contact us with your order number and a photo and we will replace it.

Frequently Asked Questions

How do I choose the correct version?

Available selections for this listing: 2.5W 4.9G 5.8G VTX. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.

How do I select the correct RF connection?

Match the connector family, gender, center contact and any SMA versus RP-SMA distinction at both ends. A connector that appears to screw on may still be electrically incompatible.

Will it work on every listed radio band?

Select the exact frequency version and check the antenna or cable specification for your operating band. Physical connector compatibility does not establish RF compatibility.

How should I choose cable length or antenna placement?

Use the required installed length without tight bends or connector strain. Account for frequency-dependent cable loss, frame clearance and the manufacturer’s mounting guidance.

Does advertised gain guarantee range?

No. Link performance depends on the complete RF system, antenna pattern and orientation, installation and operating environment. Do not use a gain figure as a range guarantee.

You may also like