VRX-F4 1.2GHz / 1.3GHz 9CH Dual-Antenna FPV Goggle Receiver Module (Skyzone Compatible)
The VRX-F4 1.2GHz / 1.3GHz FPV Goggle Receiver Module is a dual-antenna reception module designed specifically for FPV pilots seeking long-range 1.2G/1.3G video directly inside their FPV goggles. Engineered for plug-and-play installation in Skyzone (04X, 04L, 04O) module bays, the VRX-F4 features dual SMA antenna ports, an onboard OLED display, and a 5-way joystick for seamless channel tuning.
Specifications
| Parameter | Specification |
|---|---|
| Model | VRX-F4 Module (VRX-F4-L) |
| Frequency Range | 1.2GHz – 1.3GHz (9 Channels) |
| Antenna Interfaces | Dual SMA Female Ports |
| User Interface | OLED Display + 5-Way Navigation Joystick |
| Compatibility | Skyzone 04X, 04L, 04O, and modular FPV goggles / ground stations |
| Output | Standard Goggle Bay Pin Interface (Power & Video) |
Before you buy
- This is a module for a goggle bay, not a standalone receiver. It needs a Skyzone 04X/04L/04O or a compatible modular bay to plug into.
- 1.2–1.3 GHz, 9 channels only — a narrow band compared with the 80-channel receivers, so confirm your VTX can sit on one of those 9.
- Dual SMA female ports for antenna diversity; both should be fitted with antennas of the same band.
- Firmware and pinout follow the goggle bay — check that your goggle model is in the supported list before ordering.
- The 'glasses case' variant is a case, not a receiver — easy to select by mistake.
In the box
Package contents depend on selected variant:
- 1 × VRX-F4 1.2G/1.3G Dual-Antenna Receiver Module OR 1 × 04 Goggle Module Shell Cover
Why this spec
- Goggle Bay Plug-and-Play Design: Installs directly into standard modular goggle bays without cumbersome external tripod ground stations or loose wires.
- Dual-Antenna Reception: Dual SMA connectors allow simultaneous use of omnidirectional and directional patch antennas for wide coverage and long-range gain.
- 1.2GHz / 1.3GHz 9-Channel Band: Tuned for clean reception on standard 1.2G/1.3G long-range video frequencies.
- Integrated OLED & 5-Way Joystick: Fast frequency switching, band selection, and status readout directly on the module faceplate.
- Custom Skyzone Faceplate: Optional injection-molded 04-series cover provides a clean, factory-integrated look on your goggles.
What you still need to complete the build
- A VTX or VRX with the same connector (SMA vs RP-SMA)
- Matching polarisation on both ends
Support and returns
Covered against manufacturing defects for 12 months. If a unit arrives dead, loses its video lock or overheats at rated power, contact us with the order number and a short clip. Running it above the rated voltage, transmitting without an antenna, or crash damage are not covered.
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: VRX-F4-L; 04glasses case. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
How do I select the correct RF connection?
Match the connector family, gender, center contact and any SMA versus RP-SMA distinction at both ends. A connector that appears to screw on may still be electrically incompatible.
Will it work on every listed radio band?
Select the exact frequency version and check the antenna or cable specification for your operating band. Physical connector compatibility does not establish RF compatibility.
How should I choose cable length or antenna placement?
Use the required installed length without tight bends or connector strain. Account for frequency-dependent cable loss, frame clearance and the manufacturer’s mounting guidance.
Does advertised gain guarantee range?
No. Link performance depends on the complete RF system, antenna pattern and orientation, installation and operating environment. Do not use a gain figure as a range guarantee.