Digital-to-Analog Video Module – 1.2G / 1.3G / 5.8GHz Receiver Base
Digital-to-Analog Module — Turns a digital video feed back into analog so an existing analog goggle or monitor keeps working. Single- and dual-receiver bases are both listed.
Specifications
| Model | Digital-to-Analog Module |
| Type | Video base unit |
| Frequency band | 1.2 / 1.3 / 5.8 GHz |
| Connector / input voltage | See the variant you select — this listing covers more than one version |
Before you buy
- Confirm the input voltage of the exact variant you ordered before wiring it to a flight controller or BEC.
- Never power a VTX without an antenna connected — the reflected power damages the output stage.
- Check local RF regulations; high output power is not legal for general use in most countries.
In the box
- 1 × digital-to-analog base unit (single or dual receiver, as selected)
- 1 × power / video harness where the variant includes it
Why this spec
- A base unit, not a flight part — it takes the received signal and outputs analog video for a monitor or recorder.
- 1.2 / 1.3 / 5.8 GHz coverage means one box serves the long-range low band and the standard 5.8 GHz band.
- Single or dual receiver variants — dual gives diversity, single is cheaper and fine for a fixed link.
- Voltage display is a variant option, not standard: pick the version with it if you want pack voltage on the unit.
What you still need to complete the build
- A matching antenna for the band, rated above your output power
- A clean power source sized for the module's current draw
- For VRX units: a display or goggle with analog video input
Support and returns
Every unit is checked before dispatch. If a module arrives damaged or does not match the specification table, contact us with your order number and a photo and we will replace it.
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: Features a digital display that supports voltage readings; Voltage display not supported. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
How do I check video-link compatibility?
Match the exact transmit and receive frequencies, channel table and video format. A similar band name or channel number does not guarantee interoperability.
Does every option include both a transmitter and a receiver?
Check the selected version and package contents. Do not assume a combined product photograph means a complete video-link set is included.
Will a higher power setting guarantee longer range?
No. Link performance depends on antennas, receiver sensitivity, installation, interference and operating conditions. Do not treat rated output power as a distance guarantee.
What should I check before powering a transmitter?
Verify the specified input voltage, polarity and cooling requirements, and connect a suitable antenna before operating a transmitter. Follow the exact model’s setup instructions.
Will it fit my goggles or flight controller?
Confirm the mechanical interface, signal format, supply and pinout with both devices. A product-family reference does not establish compatibility with every revision.