SK1200-SPI Multi-Band VRX – 1.2G / 1.3G / 1.7G / 2.2G, SPI

SK1200-SPI Multi-Band VRX – 1.2G / 1.3G / 1.7G / 2.2G, SPI

SK1200-SPI V1.1
$34.45
Sale price  $34.45 Regular price  $34.45
Skip to product information
SK1200-SPI Multi-Band VRX – 1.2G / 1.3G / 1.7G / 2.2G, SPI

SK1200-SPI Multi-Band VRX – 1.2G / 1.3G / 1.7G / 2.2G, SPI

$34.45
Sale price  $34.45 Regular price  $34.45
ColorSK1200-SPI V1.1

SK1200-SPI — One receiver that covers four sub-GHz bands, so a long-range ground station does not need a different module per aircraft.

Specifications

Model SK1200-SPI
Type VRX
Frequency band 1.2 / 1.3 / 1.7 / 2.2 GHz
Connector / input voltage See the variant you select — this listing covers more than one version

Before you buy

  • Confirm the input voltage of the exact variant you ordered before wiring it to a flight controller or BEC.
  • Never power a VTX without an antenna connected — the reflected power damages the output stage.
  • Check local RF regulations; high output power is not legal for general use in most countries.

In the box

  • 1 × SK1200-SPI receiver module
  • 1 × wiring harness where the variant includes it

Why this spec

  • SPI output, not composite video — this module hands raw data to a host board, so it belongs in a DIY ground station, not straight into goggles.
  • Four bands (1.2 / 1.3 / 1.7 / 2.2 GHz) in one SPI module is unusual; most SPI receivers cover one band.
  • Open-source firmware target means you can integrate it into your own code rather than relying on a vendor app.
  • SPI mode requires level and timing care — wire lengths matter here far more than on an analog receiver.

What you still need to complete the build

  • A matching antenna for the band, rated above your output power
  • A clean power source sized for the module's current draw
  • For VRX units: a display or goggle with analog video input

Support and returns

Every unit is checked before dispatch. If a module arrives damaged or does not match the specification table, contact us with your order number and a photo and we will replace it.

Frequently Asked Questions

How do I choose the correct version?

Available selections for this listing: SK1200-SPI V1.1. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.

How do I check video-link compatibility?

Match the exact transmit and receive frequencies, channel table and video format. A similar band name or channel number does not guarantee interoperability.

Does every option include both a transmitter and a receiver?

Check the selected version and package contents. Do not assume a combined product photograph means a complete video-link set is included.

Will a higher power setting guarantee longer range?

No. Link performance depends on antennas, receiver sensitivity, installation, interference and operating conditions. Do not treat rated output power as a distance guarantee.

What should I check before powering a transmitter?

Verify the specified input voltage, polarity and cooling requirements, and connect a suitable antenna before operating a transmitter. Follow the exact model’s setup instructions.

Will it fit my goggles or flight controller?

Confirm the mechanical interface, signal format, supply and pinout with both devices. A product-family reference does not establish compatibility with every revision.

You may also like