RD BLS 60A/80A/90A/100A 3-8S 4-in-1 Brushless ESC (DShot600)

RD BLS 60A/80A/90A/100A 3-8S 4-in-1 Brushless ESC (DShot600)

60A Four-in-one ESC2-6S
$22.02
Sale price  $22.02 Regular price  $22.02
Skip to product information
RD BLS 60A/80A/90A/100A 3-8S 4-in-1 Brushless ESC (DShot600)

RD BLS 60A/80A/90A/100A 3-8S 4-in-1 Brushless ESC (DShot600)

$22.02
Sale price  $22.02 Regular price  $22.02
Color

The RD BLS 4-in-1 Brushless ESC Series is engineered for demanding multi-rotor platforms, heavy-payload drones, and racing aircraft requiring high current delivery and wide voltage tolerances. Built on an 8-layer 3oz heavy-copper PCB and available in 60A (2-6S) as well as 80A, 90A, and 100A (3-8S) configurations, it delivers cool, reliable motor drive under heavy aerodynamic loads.

Specifications

Series RD BLS High-Current 4-in-1 ESC
Continuous Current Options 60A, 80A, 90A, 100A
Burst Current +10A instantaneous per channel
Input Voltage 60A: 2S – 6S LiPo / 80A, 90A, 100A: 3S – 8S LiPo
Firmware BLHeli_S
Control Protocols DShot150, DShot300, DShot600, PWM, OneShot
Current Sensor Integrated High-Precision Current Shunt
Mounting Hole Pattern 30.5 × 30.5 mm (M4 with M3 silicone grommets)

Before you buy

  • Voltage differs by current rating: the 60A version is 2–6S, the 80A/90A/100A versions are 3–8S. Do not assume 8S on the 60A.
  • BLHeli_S firmware — DShot150/300/600 and PWM only; no DShot1200 or BLHeli_32 telemetry features.
  • Burst is only +10 A per channel — sustained pull near the continuous rating will heat-soak the board.
  • 30.5 × 30.5 mm with M4 holes and M3 silicone grommets — the grommets absorb vibration but also mean the FC stack sits on rubber, so check screw length.
  • Integrated current shunt — calibrate the scale in Betaflight or your mAh readings will be wrong.

In the box

  • 1 × RD BLS 4-in-1 Brushless ESC (Selected Current & Voltage Variant)
  • 1 × 8-Pin SH1.0 Connecting Cable
  • 1 × High-Frequency Low-ESR Filter Capacitor
  • 1 × Anti-Vibration Silicone Damping Grommet Set

Why this spec

  • Heavy-Copper Multi-Layer PCB: 8-layer 3oz gold-plated copper board layout lowers internal electrical resistance and enhances thermal heat dissipation.
  • Broad High-Voltage Range: Standard 60A model supports 2S to 6S LiPo, while 80A, 90A, and 100A models natively handle up to 8S LiPo (33.6V) for high-efficiency drone propulsion.
  • BLHeli_S Firmware & DShot600: Native support for DShot150, DShot300, DShot600, and bidirectional DShot RPM filtering.
  • Onboard TVS Transient Protection: Integrated TVS diode absorbs inductive voltage spikes during hard braking and rapid throttle transitions, protecting sensitive electronics.
  • Extra-Large Motor Solder Pads: Generous solder pad layout ensures secure high-current connections with heavy-gauge motor silicone wiring.

What you still need to complete the build

  • A flight controller with the matching harness
  • Motors within the ESC current rating
  • A capacitor across the battery pads

Support and returns

Covered against manufacturing defects for 12 months. Contact us with your order number and photos or a short video of the fault and we will repair or replace the item. Crash damage, water ingress and modification are not covered.

Frequently Asked Questions

How do I choose the correct version?

Available selections for this listing: 60A Four-in-one ESC2-6S; 80A Four-in-one ESC3-8S; 90A Four-in-one ESC3-8S; 100A Four-in-one ESC3-8S. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.

Does every option include both a flight controller and an ESC?

No such assumption should be made. Check the selected option and package contents to distinguish standalone boards, ESCs and complete stacks.

How do I check the supported battery voltage?

Use the voltage range for the exact selected board or stack. For a stack, the usable input must stay within the limits of every connected component, not only the ESC.

Are matching-looking connectors plug-and-play?

Compare the pinout, voltage, ground, signal order and connector orientation on both devices. The same connector housing does not guarantee matching wiring.

Which firmware target should I use?

Use the manufacturer’s exact board revision and supported firmware target. Do not flash a target based solely on the processor name or a similar product title.

Is the current rating a guarantee for my installation?

No. Check whether the published value is continuous or burst, whether it applies per channel, and the required airflow and cooling conditions. Size the system using the actual motor and propeller load.

How should I perform initial setup?

Remove propellers, verify soldering and polarity, and follow the board manufacturer’s setup procedure. Check control direction, motor mapping and failsafe before flight.

You may also like