RadioMaster TX15 Max Radio Controller (EdgeTX / AG02 CNC Hall Gimbals)
The RadioMaster TX15 Max is a flagship radio transmitter designed for demanding FPV pilots, UAV operators, and competitive RC aviators. Powered by an ultra-fast STM32H750 high-performance processor and featuring Semtech LR1121 ExpressLRS RF circuitry, the TX15 Max combines all-metal AG02 CNC Hall effect gimbals with a brilliant 3.5-inch color capacitive touchscreen and 4GB of onboard eMMC memory.
Specifications
| Model | RadioMaster TX15 Max |
| Processor | STM32H750 High-Performance MCU |
| Operating System | EdgeTX |
| Gimbals | AG02 Full CNC Aluminum Hall Gimbals |
| Display | 3.5-inch Color Capacitive Touchscreen (480 × 320) |
| Internal Storage | 4GB Onboard eMMC |
| Internal RF | Semtech LR1121 ExpressLRS Architecture |
| Antenna | Foldable Directional T-Antenna |
| External Bay | Standard JR / Micro Module Bay |
Before you buy
- This is the Max, with AG02 full-CNC hall gimbals and a 3.5-inch touchscreen. The standard TX15 has plastic gimbals and no touch display — the two are not the same radio.
- Internal ELRS is on LR1121 (2.4 GHz plus sub-GHz depending on region). Check that your receivers are on a matching ELRS major version; v3 and v2 talk, but only one way per packet rate setting.
- No batteries in the box. It takes 2 × 18650 cells; the radio will not power on until you fit them.
- EdgeTX means you set the model up yourself. There is no factory model match to a specific aircraft — plan for 20–30 minutes of setup per model.
- Regional RF rules apply. 1 W output on 2.4 GHz is not legal in every country; select the correct regulatory domain in the ELRS settings.
In the box
- 1 × RadioMaster TX15 Max Radio Controller (Selected Finish)
- 1 × Custom Hard Carry Case
- 1 × Foldable T-Antenna
- 1 × Screen Protector & USB-C Cable
- 1 × RadioMaster Lanyard & Hardware Tool Set
Why this spec
- STM32H750 High-Performance MCU: Next-generation processing core powers instantaneous menu responsiveness, advanced telemetry processing, and smooth EdgeTX execution.
- AG02 Full CNC Hall Effect Gimbals: Crafted entirely from aviation-grade aluminum with quad ball bearings for silky zero-friction articulation, external stick travel limiters, and adjustable tension.
- LR1121 Dual-Band ExpressLRS RF: Integrated high-power ExpressLRS transmission system provides rock-solid signal reliability and ultra-low latency.
- 3.5" Color Capacitive Touchscreen: Bright 480 × 320 sunlight-readable color touch display allows direct finger navigation, telemetry dashboards, and script controls.
- 4GB Onboard eMMC Storage: Eliminates SD card corruption risks while providing ample internal room for sound packs, model files, and logging.
- Anodized CNC Accents: Premium anodized aluminum gimbal rings, buttons, dials, and scroll roller in matching contrast colors.
What you still need to complete the build
- An ELRS transmitter or module
- A free UART on the flight controller
- Matching firmware major version on both ends
Support and returns
Covered against manufacturing defects for 12 months. If a radio or receiver arrives dead, will not bind or has a defective gimbal, contact us with the order number and a short video. Crash damage, water ingress and damage from an incorrect firmware flash are not covered.
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: Red Style; Black Style; Gold Style. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
What information is needed to confirm a custom part?
Provide a dimensioned drawing or CAD file, material requirements, thickness or tube dimensions, hole locations, tolerances, finish and quantity. Confirm the final specification before ordering.
Are the photographed dimensions the final production dimensions?
Use the agreed drawing and the selected specification, not proportions measured from a photograph. Confirm critical clearances and hole spacing before production.
Does weave or appearance establish structural performance?
No. Appearance alone does not establish laminate construction, load capacity or suitability for a particular aircraft. Confirm engineering requirements for the intended application.
Are hardware and electronics included?
Only items explicitly listed for the selected configuration or agreed quotation should be treated as included. Confirm fasteners, inserts and any assembly work separately.
Can this part be installed without checking fit?
Compare the final dimensions and mounting interfaces with the intended assembly. Electrically isolate carbon-fiber parts from exposed conductors and inspect machined edges before installation.