FLYDEN 6S 2500mAh 120C LiPo – 22.2V 55.5Wh, XT60, FPV Long Range
FLYDEN 6S 2500mAh is a high-rate pack sized for 6-inch and lightweight 7-inch long-range builds. At 120C continuous it delivers 300A, which leaves roughly 1.9× headroom over what a 7-inch quad pulls at full throttle — the pack stays cool and the voltage sags less under punch-outs.
Weight is 406g, so it suits pilots who want long cruise time without a heavy nose. A 70°C over-temperature indicator on the pack changes color if a cell is being pushed too hard.
Specifications
| Brand | FLYDEN |
| Configuration | 6S 22.2 V |
| Capacity | 2500 mAh / 55.5 Wh |
| Continuous discharge | 120C (300 A) |
| Connector | XT60 |
| Balance plug | JST-XH |
| Weight | 406 g |
| Over-temperature indicator | Yes, 70 °C colour change |
| Certification | UN38.3, MSDS |
| Cell chemistry | LiPo, soft case |
Before you buy
- 6-inch FPV: ideal — high rate, moderate weight.
- 7-inch long range: good for lightweight builds; expect roughly 4.5–5 minutes of cruise. For 8–10 minute flights step up to a 3000–4000mAh pack.
- Not for 5-inch freestyle: 406g is too heavy; use a 4S/6S 1300–1500mAh pack instead.
- Charge at 1C (2.5A), 2C maximum. High discharge rating does not mean fast charge.
- Never discharge below 3.5V per cell (21V pack) and store at 3.8V per cell for anything longer than a few days.
- Shipping: lithium batteries ship as dangerous goods (UN3480). Delivery may take longer than standard parcels and some destinations are excluded.
In the box
- 1 × FLYDEN 6S 2500mAh 120C LiPo pack
- XT60 main connector
- JST-XH balance lead
Why this spec
- 120C continuous is 300 A. A 7-inch 2806.5 build pulls roughly 150–165 A at full throttle, so the pack runs at about half its rating — that is why it sags less on punch-outs than a 100C pack of the same size.
- 406 g for 55.5 Wh lets the pack sit inside a wide-body 7-inch frame instead of strapped on top, so the centre of gravity stays on the motor plane.
- The 70 °C indicator on the wrap changes colour if a cell is being pushed too hard — you see abuse before the pack puffs.
- UN38.3 test summary and MSDS are supplied, so the pack ships as declared dangerous goods instead of being held at customs.
What you still need to complete the build
- A charger rated for your cell count
- A LiPo-safe charging bag
- The correct connector for your build
Support and returns
Lithium packs are covered for manufacturing defects and cells that fail to hold voltage on arrival — report it within 7 days with a photo of the pack and a cell-voltage reading. Crash damage, over-discharge below 3.0 V per cell and packs stored fully charged are not covered.
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: 【6S 120C 2500mAh】. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
How do I check electrical and physical compatibility?
Match the selected pack’s chemistry, series-cell count, voltage range, connector polarity, dimensions and weight to the equipment and its power system. A matching connector alone does not establish compatibility.
What do S and P mean?
S denotes cells connected in series; P denotes parallel groups. Compare nominal voltage and fully charged voltage separately, using the selected pack’s specification.
Which charger and charge current should I use?
Use a charger approved for the selected battery chemistry and cell count. Follow the battery manufacturer’s charge-current limit and balance-charging instructions; do not infer a safe charge rate from discharge C ratings.
Does the pack include protection electronics?
Do not assume that a protection board, low-voltage cutoff or temperature cutoff is included. Confirm the selected pack’s documentation and the aircraft or controller’s protection settings before use.
Is a C rating enough to choose a pack?
No. Check documented current limits, test conditions, connector limits and the intended load. A printed C rating is not a guarantee of usable continuous current or flight time.
How should I handle and store the battery?
Follow the manufacturer’s storage-voltage and temperature guidance. Protect terminals from shorts, supervise charging and stop using a pack that is damaged, swollen or behaving abnormally.