BrotherHobby Avenger 2812 V3 Brushless Motor
The BrotherHobby Avenger 2812 V3 is a high-torque brushless motor tailored for 8- to 10-inch long-range, cinematic, and heavy-payload multirotors. Built with a 12N14P configuration, 0.2mm silicon steel laminations, 7075 aluminum bell housing, and wide 5S–8S voltage capability.
Specifications
| Stator Size | 2812 (28mm diameter × 12mm height) |
| Configuration | 12N14P |
| Stator Lamination | 0.2mm Silicon Steel Sheets |
| Bell & Base Material | 7075 Aluminum Alloy |
| Shaft Material | Titanium Alloy Hollow Shaft |
| Output Shaft Thread | M5 |
| Magnets | N52H Curved Neodymium |
| Bearings | Japanese NMB 12×6×4 mm |
| Motor Dimensions | Φ33.9mm × 42.0mm (16mm shaft length, 8.5mm thread) |
| Motor Weight | 76.5g (including wires) |
| Lead Wire | 18AWG Silicone Wire, 25cm (250mm) |
| Rated Operating Voltage | 5S–8S LiPo |
| Base Mounting Pattern | 19×19mm (4× holes on 19mm circle) |
| Available KV Options | 900KV, 1115KV |
Before you buy
- 2812 at 900KV or 1115KV, rated 5S–8S — 900KV for 6S on 7-inch endurance, 1115KV for 6S on 6-inch or 5S on 7-inch.
- 76.5 g with 250 mm 18AWG wire — a mid-weight 7-inch motor.
- 0.2 mm stator laminations reduce eddy losses compared with 0.35 mm, which is why the efficiency is good at part throttle.
- 19 × 19 mm M3 mounting, M5 prop thread, 8.5 mm thread length — check prop hub thickness.
- Japanese NMB 12×6×4 bearings — replaceable, and worth replacing rather than discarding a motor when they wear.
In the box
- 1 × BrotherHobby Avenger 2812 V3 Brushless Motor
- 4 × Mounting Screws
- 1 × M5 Flange Nut
Why this spec
- 12N14P configuration with 0.2mm high-efficiency silicon steel laminations
- 7075 aluminum alloy bell and base with hard anodizing for scratch and wear resistance
- Titanium alloy hollow shaft with standard M5 output thread
- Japanese NMB 12×6×4 mm bearings for smooth operation and durability
- N52H curved neodymium magnets
- 18AWG high-strand silicone lead wire (25cm length)
- Wide 5S–8S LiPo operational voltage range
Bench tests conducted with 9.0×4.7 carbon fiber 2-blade propellers on a 6S battery bench platform (29°C–31°C ambient, 2 minutes at 100% throttle).
| KV Variant | Throttle (%) | Voltage (V) | Current (A) | RPM | Thrust (gf) | Input Power (W) | Efficiency (gf/W) | Motor Temp (2 min) |
|---|---|---|---|---|---|---|---|---|
| 900KV | 50% 100% |
24.0V 23.8V |
5.9A 33.8A |
9,238 16,416 |
780 gf 2,750 gf |
141.6W 804.4W |
5.51 gf/W 3.42 gf/W |
-- 97.8°C |
| 1115KV | 50% 100% |
24.0V 23.7V |
10.1A 54.5A |
10,949 18,768 |
1,090 gf 3,520 gf |
242.4W 1,291.6W |
4.50 gf/W 2.73 gf/W |
-- 92.6°C |
What you still need to complete the build
- A frame with the matching motor hole pattern
- ESCs or a 4-in-1 sized for the prop and cell count
- Props matched to the KV
- Locking compound for the motor screws
Support and returns
Covered against manufacturing defects for 12 months — bearings, windings and bell balance. If a motor arrives with a bent shaft, a rubbing bell or a dead phase, contact us with the order number and a photo and we replace it. Crash damage, burnt windings from a stalled prop and water ingress are not covered.
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: 1115KV; 900KV. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
How do I choose the correct KV?
Choose the exact KV using motor test data for your intended battery voltage and propeller. KV alone does not determine thrust, efficiency or suitability for a particular aircraft.
Will this motor fit my frame and propeller?
Compare mounting-hole spacing, screw thread and depth, shaft or hub dimensions and available clearance with your frame and propeller. Similar stator sizes do not guarantee identical mounting.
How should I size the ESC and battery?
Use measured current for the selected motor, voltage and propeller combination, then check ESC thermal limits, battery current capability and connector ratings. Do not treat peak test figures as continuous-use guarantees.
Are thrust figures valid for every version?
No. Thrust and current depend on the exact KV, voltage, propeller and test conditions. Use only data that matches the selected configuration.
What should I check before the first run?
Verify screw clearance from the windings, secure the motor and wiring, and check rotation with propellers removed. Stop if there is binding, unusual vibration or abnormal heating.