BrotherHobby Avenger 2812 V3 Brushless Motor

BrotherHobby Avenger 2812 V3 Brushless Motor

1115KV
$26.36
Sale price  $26.36 Regular price  $26.36
Skip to product information
BrotherHobby Avenger 2812 V3 Brushless Motor

BrotherHobby Avenger 2812 V3 Brushless Motor

$26.36
Sale price  $26.36 Regular price  $26.36
Size

The BrotherHobby Avenger 2812 V3 is a high-torque brushless motor tailored for 8- to 10-inch long-range, cinematic, and heavy-payload multirotors. Built with a 12N14P configuration, 0.2mm silicon steel laminations, 7075 aluminum bell housing, and wide 5S–8S voltage capability.

Specifications

Stator Size 2812 (28mm diameter × 12mm height)
Configuration 12N14P
Stator Lamination 0.2mm Silicon Steel Sheets
Bell & Base Material 7075 Aluminum Alloy
Shaft Material Titanium Alloy Hollow Shaft
Output Shaft Thread M5
Magnets N52H Curved Neodymium
Bearings Japanese NMB 12×6×4 mm
Motor Dimensions Φ33.9mm × 42.0mm (16mm shaft length, 8.5mm thread)
Motor Weight 76.5g (including wires)
Lead Wire 18AWG Silicone Wire, 25cm (250mm)
Rated Operating Voltage 5S–8S LiPo
Base Mounting Pattern 19×19mm (4× holes on 19mm circle)
Available KV Options 900KV, 1115KV

Before you buy

  • 2812 at 900KV or 1115KV, rated 5S–8S — 900KV for 6S on 7-inch endurance, 1115KV for 6S on 6-inch or 5S on 7-inch.
  • 76.5 g with 250 mm 18AWG wire — a mid-weight 7-inch motor.
  • 0.2 mm stator laminations reduce eddy losses compared with 0.35 mm, which is why the efficiency is good at part throttle.
  • 19 × 19 mm M3 mounting, M5 prop thread, 8.5 mm thread length — check prop hub thickness.
  • Japanese NMB 12×6×4 bearings — replaceable, and worth replacing rather than discarding a motor when they wear.

In the box

  • 1 × BrotherHobby Avenger 2812 V3 Brushless Motor
  • 4 × Mounting Screws
  • 1 × M5 Flange Nut

Why this spec

  • 12N14P configuration with 0.2mm high-efficiency silicon steel laminations
  • 7075 aluminum alloy bell and base with hard anodizing for scratch and wear resistance
  • Titanium alloy hollow shaft with standard M5 output thread
  • Japanese NMB 12×6×4 mm bearings for smooth operation and durability
  • N52H curved neodymium magnets
  • 18AWG high-strand silicone lead wire (25cm length)
  • Wide 5S–8S LiPo operational voltage range

Bench tests conducted with 9.0×4.7 carbon fiber 2-blade propellers on a 6S battery bench platform (29°C–31°C ambient, 2 minutes at 100% throttle).

KV Variant Throttle (%) Voltage (V) Current (A) RPM Thrust (gf) Input Power (W) Efficiency (gf/W) Motor Temp (2 min)
900KV 50%
100%
24.0V
23.8V
5.9A
33.8A
9,238
16,416
780 gf
2,750 gf
141.6W
804.4W
5.51 gf/W
3.42 gf/W
--
97.8°C
1115KV 50%
100%
24.0V
23.7V
10.1A
54.5A
10,949
18,768
1,090 gf
3,520 gf
242.4W
1,291.6W
4.50 gf/W
2.73 gf/W
--
92.6°C

What you still need to complete the build

  • A frame with the matching motor hole pattern
  • ESCs or a 4-in-1 sized for the prop and cell count
  • Props matched to the KV
  • Locking compound for the motor screws

Support and returns

Covered against manufacturing defects for 12 months — bearings, windings and bell balance. If a motor arrives with a bent shaft, a rubbing bell or a dead phase, contact us with the order number and a photo and we replace it. Crash damage, burnt windings from a stalled prop and water ingress are not covered.

Frequently Asked Questions

How do I choose the correct version?

Available selections for this listing: 1115KV; 900KV. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.

How do I choose the correct KV?

Choose the exact KV using motor test data for your intended battery voltage and propeller. KV alone does not determine thrust, efficiency or suitability for a particular aircraft.

Will this motor fit my frame and propeller?

Compare mounting-hole spacing, screw thread and depth, shaft or hub dimensions and available clearance with your frame and propeller. Similar stator sizes do not guarantee identical mounting.

How should I size the ESC and battery?

Use measured current for the selected motor, voltage and propeller combination, then check ESC thermal limits, battery current capability and connector ratings. Do not treat peak test figures as continuous-use guarantees.

Are thrust figures valid for every version?

No. Thrust and current depend on the exact KV, voltage, propeller and test conditions. Use only data that matches the selected configuration.

What should I check before the first run?

Verify screw clearance from the windings, secure the motor and wiring, and check rotation with propellers removed. Stop if there is binding, unusual vibration or abnormal heating.

You may also like