BrotherHobby Avenger 2806.5 Brushless Motor – 1300/1460/1700/1920KV, 6S-8S

BrotherHobby Avenger 2806.5 Brushless Motor – 1300/1460/1700/1920KV, 6S-8S

1300KV
$55.99
Sale price  $55.99 Regular price  $25.31
Skip to product information
BrotherHobby Avenger 2806.5 Brushless Motor – 1300/1460/1700/1920KV, 6S-8S

BrotherHobby Avenger 2806.5 Brushless Motor – 1300/1460/1700/1920KV, 6S-8S

$55.99
Sale price  $55.99 Regular price  $25.31
Size

Avenger 2806.5 is the mid-size BrotherHobby motor that sits between 5-inch 2207 and heavy-lift 2812. It is the natural choice for 7-inch long range on 6S, and it also works on 6-inch freestyle builds at higher KV.

Specifications

Stator size 2806.5
KV options 1300 / 1460 / 1700 / 1920
Voltage 6S–8S (per KV choice)
Configuration 12N14P
Mounting 16×16 mm / 19×19 mm
Shaft 5 mm
Recommended props 7-inch at 1300KV; 6-inch at 1700–1920KV

Before you buy

  • 1300KV — 7-inch, 6S, long range. The one this frame kit is designed around.
  • 1460KV — 7-inch with lighter props, or 6-inch on 6S.
  • 1700KV / 1920KV — 6-inch freestyle on 6S. Too hot for 7-inch.
  • Price is per motor. A quad needs four.
  • Check your ESC current. 1300KV on 7-inch peaks around 35–40A per motor; use a 60A 4-in-1 or better.
  • KV and prop size must match. Running 1920KV on 7-inch props will overheat the motor.

In the box

  • 1 × motor
  • Mounting screws
  • Prop nut

Why this spec

  • 2806.5 stator on a 6S 7-inch prop is the efficiency sweet spot: enough torque for 7040 at 60% throttle without the current spike of a 2812.
  • N52SH magnets and a single-piece bell — the bell does not flex under load, which is what keeps the air gap tight at high RPM.
  • Japanese NMB bearings, serviceable: the bell comes off with four screws, so a bearing change is a bench job, not a motor replacement.
  • Curved magnet retention plus balancing at the factory — measured vibration is low enough to run without soft-mounting.

What you still need to complete the build

  • 1× frame with 16×16 or 19×19 motor pattern
  • 4× ESCs or 1× 4-in-1 stack
  • 4× 7-inch props
  • 6S LiPo

We stock every line above — order them together and the parts are matched, not guessed.

Support and returns

Every unit is checked before dispatch. If a part arrives damaged or does not match the specification table above, contact us with your order number and a photo and we will replace it. Consumables (props, antennas) are covered for manufacturing defects, not crash damage.

Frequently Asked Questions

How do I choose the correct version?

Available selections for this listing: 1300KV; 1460KV; 1700KV; 1920KV. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.

How do I choose the correct KV?

Choose the exact KV using motor test data for your intended battery voltage and propeller. KV alone does not determine thrust, efficiency or suitability for a particular aircraft.

Will this motor fit my frame and propeller?

Compare mounting-hole spacing, screw thread and depth, shaft or hub dimensions and available clearance with your frame and propeller. Similar stator sizes do not guarantee identical mounting.

How should I size the ESC and battery?

Use measured current for the selected motor, voltage and propeller combination, then check ESC thermal limits, battery current capability and connector ratings. Do not treat peak test figures as continuous-use guarantees.

Are thrust figures valid for every version?

No. Thrust and current depend on the exact KV, voltage, propeller and test conditions. Use only data that matches the selected configuration.

What should I check before the first run?

Verify screw clearance from the windings, secure the motor and wiring, and check rotation with propellers removed. Stop if there is binding, unusual vibration or abnormal heating.

You may also like