VTX-F1 4.9 / 5.8 / 6GHz VTX – 1600mW Fixed Output, Long Range
VTX-F1 — 1600 mW at a fixed output, across the three bands most ground stations already cover. Fixed output means the power you test on the bench is the power you fly.
Specifications
| Model | VTX-F1 |
| Type | VTX |
| Frequency band | 4.9 / 5.8 / 6 GHz |
| Output power | 1600 mW |
| Connector / input voltage | See the variant you select — this listing covers more than one version |
Before you buy
- Confirm the input voltage of the exact variant you ordered before wiring it to a flight controller or BEC.
- Never power a VTX without an antenna connected — the reflected power damages the output stage.
- Check local RF regulations; high output power is not legal for general use in most countries.
In the box
- 1 × VTX-F1 transmitter
- 1 × power / video harness
- Antenna not included
Why this spec
- Fixed 1600 mW output, no power switching — one power level means one heat profile and no accidental low-power takeoff.
- 4.9 / 5.8 / 6 GHz covers the three analog sub-bands in one unit, so a single spare covers several aircraft.
- 1600 mW is a fixed-wing figure: it is enough for a long-range cruise and small enough that the module does not need a fan in most installs.
- Trimmed to a fixed output — you lose the 25 mW pit mode, so do not plan on a bench test without a dummy load or antenna.
What you still need to complete the build
- A matching antenna for the band, rated above your output power
- A clean power source sized for the module's current draw
- For VRX units: a display or goggle with analog video input
Support and returns
Every unit is checked before dispatch. If a module arrives damaged or does not match the specification table, contact us with your order number and a photo and we will replace it.
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: VTX-F1-72Image transmission. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
How do I check video-link compatibility?
Match the exact transmit and receive frequencies, channel table and video format. A similar band name or channel number does not guarantee interoperability.
Does every option include both a transmitter and a receiver?
Check the selected version and package contents. Do not assume a combined product photograph means a complete video-link set is included.
Will a higher power setting guarantee longer range?
No. Link performance depends on antennas, receiver sensitivity, installation, interference and operating conditions. Do not treat rated output power as a distance guarantee.
What should I check before powering a transmitter?
Verify the specified input voltage, polarity and cooling requirements, and connect a suitable antenna before operating a transmitter. Follow the exact model’s setup instructions.
Will it fit my goggles or flight controller?
Confirm the mechanical interface, signal format, supply and pinout with both devices. A product-family reference does not establish compatibility with every revision.