VTX-F1 4.9 / 5.8 / 6GHz VTX – 1600mW Fixed Output, Long Range

VTX-F1 4.9 / 5.8 / 6GHz VTX – 1600mW Fixed Output, Long Range

VTX-F1-72Image transmission
$30.70
Sale price  $30.70 Regular price  $30.70
Skip to product information
VTX-F1 4.9 / 5.8 / 6GHz VTX – 1600mW Fixed Output, Long Range

VTX-F1 4.9 / 5.8 / 6GHz VTX – 1600mW Fixed Output, Long Range

$30.70
Sale price  $30.70 Regular price  $30.70
ColorVTX-F1-72Image transmission

VTX-F1 — 1600 mW at a fixed output, across the three bands most ground stations already cover. Fixed output means the power you test on the bench is the power you fly.

Specifications

Model VTX-F1
Type VTX
Frequency band 4.9 / 5.8 / 6 GHz
Output power 1600 mW
Connector / input voltage See the variant you select — this listing covers more than one version

Before you buy

  • Confirm the input voltage of the exact variant you ordered before wiring it to a flight controller or BEC.
  • Never power a VTX without an antenna connected — the reflected power damages the output stage.
  • Check local RF regulations; high output power is not legal for general use in most countries.

In the box

  • 1 × VTX-F1 transmitter
  • 1 × power / video harness
  • Antenna not included

Why this spec

  • Fixed 1600 mW output, no power switching — one power level means one heat profile and no accidental low-power takeoff.
  • 4.9 / 5.8 / 6 GHz covers the three analog sub-bands in one unit, so a single spare covers several aircraft.
  • 1600 mW is a fixed-wing figure: it is enough for a long-range cruise and small enough that the module does not need a fan in most installs.
  • Trimmed to a fixed output — you lose the 25 mW pit mode, so do not plan on a bench test without a dummy load or antenna.

What you still need to complete the build

  • A matching antenna for the band, rated above your output power
  • A clean power source sized for the module's current draw
  • For VRX units: a display or goggle with analog video input

Support and returns

Every unit is checked before dispatch. If a module arrives damaged or does not match the specification table, contact us with your order number and a photo and we will replace it.

Frequently Asked Questions

How do I choose the correct version?

Available selections for this listing: VTX-F1-72Image transmission. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.

How do I check video-link compatibility?

Match the exact transmit and receive frequencies, channel table and video format. A similar band name or channel number does not guarantee interoperability.

Does every option include both a transmitter and a receiver?

Check the selected version and package contents. Do not assume a combined product photograph means a complete video-link set is included.

Will a higher power setting guarantee longer range?

No. Link performance depends on antennas, receiver sensitivity, installation, interference and operating conditions. Do not treat rated output power as a distance guarantee.

What should I check before powering a transmitter?

Verify the specified input voltage, polarity and cooling requirements, and connect a suitable antenna before operating a transmitter. Follow the exact model’s setup instructions.

Will it fit my goggles or flight controller?

Confirm the mechanical interface, signal format, supply and pinout with both devices. A product-family reference does not establish compatibility with every revision.

You may also like