Upgrade R3115 900KV DJI drone motor 3-6S Wide voltage Adaptation Mark4 APEX Uav
Brushless Motor Overview
Motor for compatible UAV propulsion or actuation systems.
Selection Checklist
- Verify dimensions, KV or winding variant and mounting pattern.
- Check battery, ESC or driver compatibility and thermal requirements.
- Confirm shaft, connectors and intended load.
Refer to manufacturer test data for current, thrust and efficiency.
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
What you still need
- A frame with the matching motor hole pattern
- ESCs or a 4-in-1 sized for the prop and cell count
- Props matched to the KV
- Locking compound for the motor screws
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: 3115-900KV [2Generation] 1 pc; 3115-900KV [2Generation] Set of 4. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
How do I choose the correct KV?
Choose the exact KV using motor test data for your intended battery voltage and propeller. KV alone does not determine thrust, efficiency or suitability for a particular aircraft.
Will this motor fit my frame and propeller?
Compare mounting-hole spacing, screw thread and depth, shaft or hub dimensions and available clearance with your frame and propeller. Similar stator sizes do not guarantee identical mounting.
How should I size the ESC and battery?
Use measured current for the selected motor, voltage and propeller combination, then check ESC thermal limits, battery current capability and connector ratings. Do not treat peak test figures as continuous-use guarantees.
Are thrust figures valid for every version?
No. Thrust and current depend on the exact KV, voltage, propeller and test conditions. Use only data that matches the selected configuration.
What should I check before the first run?
Verify screw clearance from the windings, secure the motor and wiring, and check rotation with propellers removed. Stop if there is binding, unusual vibration or abnormal heating.