F405 & FT722 Flight Controller / 60A & 80A 4-in-1 ESC Stack Kit (3-8S LiPo)
This F405 and FT722 Flight Controller and BLHeli_S 4-in-1 ESC Stack Kit is a versatile power and control package designed for high-performance freestyle, long-range cruiser, and industrial UAV drone platforms. Offering a choice between STM32F405 and high-speed FT722 flight controllers paired with 60A or 80A 4-in-1 ESCs, this hardware stack delivers clean power regulation, low-latency telemetry, and robust current capacity.
Specifications
| Component | Specification |
|---|---|
| Flight Controller Options | F405 (STM32F405) or FT722 (STM32F722, SPL06 Baro, 16MB Blackbox) |
| ESC Current Ratings | 60A (3–6S LiPo) or 80A (3–8S LiPo) continuous per channel |
| ESC Firmware / Protocol | BLHeli_S / DShot300 & DShot600 supported |
| BEC Outputs | 5V/3A, 9V/2.5A (or 10V/2.5A) |
| Mounting Pattern | 30.5 × 30.5mm (M3 silicone grommets) |
Before you buy
- Six variants — FC only, or with 60A (3–6S) / 80A (3–8S) ESC. Pick the pack voltage first, then the variant.
- F405 vs FT722: FT722 adds SPL06 barometer and 16MB blackbox; F405 is the baseline Betaflight target.
- BLHeli_S / DShot300-600, no BLHeli_32 telemetry.
- Dual BEC: 5V/3A and 9V/2.5A — enough for a receiver, GPS and a modest VTX, not for high-power accessories.
- 30.5 × 30.5 mm M3 with silicone grommets — check stack screw length.
In the box
Package contents depend on selected variant (Standalone FC or Combo Stack):
- 1 × Flight Controller (F405 or FT722) OR Complete FC + ESC Stack
- 1 × 8-Pin SH1.0 Connecting Cable
- 4 × Silicone Vibration-Damping Grommets (M3)
- 1 × Low-ESR Filter Capacitor (Stack combos only)
- 1 × XT60 Power Cable (Stack combos only)
Why this spec
- Processor Selection: Proven STM32F405 or high-bandwidth FT722 flight controller running the latest Betaflight firmware.
- Heavy-Duty Current Ratings: Choose between 60A (3–6S LiPo) and 80A (3–8S LiPo) BLHeli_S 4-in-1 ESC options.
- Dual Filtered Power Rails: Onboard 5V and 9V/10V BEC supplies provide stable, noise-free power for HD digital systems and flight peripherals.
- Plug-and-Play Digital FPV: Pre-wired harness port compatible with DJI O3, Caddx Vista, Walksnail Avatar, and HDZero digital video systems.
- Standard 30.5 × 30.5mm Layout: Universal mounting dimensions with vibration-damping silicone grommets.
What you still need to complete the build
- A charger rated for your cell count
- A LiPo-safe charging bag
- The correct connector for your build
Support and returns
Covered against manufacturing defects for 12 months. If a board arrives dead, loses a UART or will not hold a flash, contact us with the order number and a short video of the fault. Reverse-polarity damage, solder bridges and crash damage are not covered.
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: F405 Flight Controller Only; F405 FC + 60A ESC; F405 FC + 80A ESC; FT722 Flight Controller Only; FT722 FC + 60A ESC; FT722 FC + 80A ESC. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
How do I check electrical and physical compatibility?
Match the selected pack’s chemistry, series-cell count, voltage range, connector polarity, dimensions and weight to the equipment and its power system. A matching connector alone does not establish compatibility.
What do S and P mean?
S denotes cells connected in series; P denotes parallel groups. Compare nominal voltage and fully charged voltage separately, using the selected pack’s specification.
Which charger and charge current should I use?
Use a charger approved for the selected battery chemistry and cell count. Follow the battery manufacturer’s charge-current limit and balance-charging instructions; do not infer a safe charge rate from discharge C ratings.
Does the pack include protection electronics?
Do not assume that a protection board, low-voltage cutoff or temperature cutoff is included. Confirm the selected pack’s documentation and the aircraft or controller’s protection settings before use.
Is a C rating enough to choose a pack?
No. Check documented current limits, test conditions, connector limits and the intended load. A printed C rating is not a guarantee of usable continuous current or flight time.
How should I handle and store the battery?
Follow the manufacturer’s storage-voltage and temperature guidance. Protect terminals from shorts, supervise charging and stop using a pack that is damaged, swollen or behaving abnormally.