SK-VTX04 3.3GHz 4.5W VTX – 64CH, OSD Parameter Tuning, Long Range

SK-VTX04 3.3GHz 4.5W VTX – 64CH, OSD Parameter Tuning, Long Range

SK-VTX04
$55.72
Sale price  $55.72 Regular price  $55.72
Skip to product information
SK-VTX04 3.3GHz 4.5W VTX – 64CH, OSD Parameter Tuning, Long Range

SK-VTX04 3.3GHz 4.5W VTX – 64CH, OSD Parameter Tuning, Long Range

$55.72
Sale price  $55.72 Regular price  $55.72
ColorSK-VTX04

SK-VTX04 — 3.3 GHz sits well below the crowded 5.8 GHz band, so it holds a cleaner link when several pilots are flying the same site — at the cost of needing 3.3 GHz receivers on the ground.

Specifications

Model SK-VTX04
Type VTX
Frequency band 3.3 GHz
Output power 4.5 W
Channels 64
Connector / input voltage See the variant you select — this listing covers more than one version

Before you buy

  • Confirm the input voltage of the exact variant you ordered before wiring it to a flight controller or BEC.
  • Never power a VTX without an antenna connected — the reflected power damages the output stage.
  • Check local RF regulations; high output power is not legal for general use in most countries.

In the box

  • 1 × SK-VTX04 transmitter
  • 1 × power / video harness
  • Antenna not included

Why this spec

  • 3.3 GHz is a compromise band — less crowded than 5.8 GHz and less antenna-hungry than 1.2 GHz, which is why it shows up in long-range fixed-wing setups.
  • 4.5 W with 64 channels gives both reach and enough slots to step away from interference on site.
  • OSD parameter tuning means you change power and channel from the flight controller's OSD instead of landing and pressing buttons.
  • 64 channels is dense for this band — check your local allocation before transmitting; not every country allows 3.3 GHz at all.

What you still need to complete the build

  • A matching antenna for the band, rated above your output power
  • A clean power source sized for the module's current draw
  • For VRX units: a display or goggle with analog video input

Support and returns

Every unit is checked before dispatch. If a module arrives damaged or does not match the specification table, contact us with your order number and a photo and we will replace it.

Frequently Asked Questions

How do I choose the correct version?

Available selections for this listing: SK-VTX04. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.

How do I check video-link compatibility?

Match the exact transmit and receive frequencies, channel table and video format. A similar band name or channel number does not guarantee interoperability.

Does every option include both a transmitter and a receiver?

Check the selected version and package contents. Do not assume a combined product photograph means a complete video-link set is included.

Will a higher power setting guarantee longer range?

No. Link performance depends on antennas, receiver sensitivity, installation, interference and operating conditions. Do not treat rated output power as a distance guarantee.

What should I check before powering a transmitter?

Verify the specified input voltage, polarity and cooling requirements, and connect a suitable antenna before operating a transmitter. Follow the exact model’s setup instructions.

Will it fit my goggles or flight controller?

Confirm the mechanical interface, signal format, supply and pinout with both devices. A product-family reference does not establish compatibility with every revision.

You may also like