SK-VRX02 3.3GHz–3.8GHz 80CH FPV Video Receiver Module (OLED / Signal Alarm)
The SK-VRX02 is an advanced 3.3GHz–3.8GHz (3.1GHz to 3.8GHz wideband) 80-Channel FPV Video Receiver designed for dedicated long-range FPV operations outside congested 5.8GHz and 2.4GHz bands. Featuring a high-contrast OLED screen, multi-function jog wheel, integrated RSSI signal strength alarm, and standard SMA antenna interface, the SK-VRX02 delivers crisp analog video reception for ground stations and FPV monitors.
Specifications
| Parameter | Specification |
|---|---|
| Model | SK-VRX02 |
| Operating Frequency | 3.3GHz – 3.8GHz (Wideband 3.1GHz – 3.8GHz) |
| Channels | 80 Channels |
| Display | OLED Monochrome Screen |
| Antenna Port | SMA Female (50Ω) |
| Signal Alarm | Built-In Low RSSI Audible Buzzer |
| Video Output | Standard Analog Composite Video (CVBS) |
Before you buy
- 3.3–3.8 GHz band only. Your VTX must be on that band; 5.8 GHz and 1.2/1.3 GHz gear will not be received at all.
- SMA female, 50 Ω — the antenna needs an SMA male connector; RP-SMA looks identical and will not make contact.
- Analog CVBS output — this feeds goggles or a monitor with analog input, not a digital HD system.
- 80 channels with OLED + buzzer — the low-RSSI alarm is useful, but it is a warning, not a link-quality meter.
- Cables are included only on the 'Contains wires' variant — check which option you select.
In the box
Package contents depend on selected variant:
- 1 × SK-VRX02 Video Receiver Module (with AV/Power Cable Set) OR 1 × ANT-3G3 Tuned Antenna
Why this spec
- 3.3GHz–3.8GHz Dedicated Bandwidth: Avoids 5.8GHz and 2.4GHz RF congestion, offering superior foliage and atmospheric penetration for extreme long-range flights.
- 80 Selectable Channels: Broad frequency coverage across 3.1GHz to 3.8GHz for interference-free multi-pilot operation.
- Integrated RSSI Signal Alarm: Audible buzzer alerts pilots when signal reception drops below safe operational thresholds.
- OLED Parameter Display: Displays real-time frequency, band, RSSI percentage, and receiver status.
- Standard Ground Station Integration: Includes DC input and AV composite video output wiring for monitors, DVRs, or FPV goggles.
What you still need to complete the build
- An ELRS transmitter or module
- A free UART on the flight controller
- Matching firmware major version on both ends
Support and returns
Covered against manufacturing defects for 12 months. If a unit arrives dead, loses its video lock or overheats at rated power, contact us with the order number and a short clip. Running it above the rated voltage, transmitting without an antenna, or crash damage are not covered.
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: SK-VRX02【Contains wires】; ANT-3G3. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
How do I check video-link compatibility?
Match the exact transmit and receive frequencies, channel table and video format. A similar band name or channel number does not guarantee interoperability.
Does every option include both a transmitter and a receiver?
Check the selected version and package contents. Do not assume a combined product photograph means a complete video-link set is included.
Will a higher power setting guarantee longer range?
No. Link performance depends on antennas, receiver sensitivity, installation, interference and operating conditions. Do not treat rated output power as a distance guarantee.
What should I check before powering a transmitter?
Verify the specified input voltage, polarity and cooling requirements, and connect a suitable antenna before operating a transmitter. Follow the exact model’s setup instructions.
Will it fit my goggles or flight controller?
Confirm the mechanical interface, signal format, supply and pinout with both devices. A product-family reference does not establish compatibility with every revision.