SK-VRX01 Multi-Band 1.2G/1.3G/1.7G/2.2G 80CH FPV Video Receiver (OLED Display)
The SK-VRX01 Multi-Band FPV Video Receiver is a universal long-range ground station receiver supporting 1.2GHz, 1.3GHz, 1.7GHz, and 2.2GHz transmission frequencies across 80 selectable channels. Ideal for long-range UAV monitoring, autonomous mapping, and cinematic exploration, the SK-VRX01 delivers high sensitivity, low-frequency signal penetration, and real-time RSSI monitoring.
Specifications
| Parameter | Specification |
|---|---|
| Model | SK-VRX01 |
| Supported Bands | 1.2GHz / 1.3GHz / 1.7GHz / 2.2GHz |
| Channel Capacity | 80 Channels |
| Display Type | OLED Status Display |
| Antenna Connector | SMA Female |
| Alarm Function | Acoustic Low-RSSI Warning Buzzer |
| Signal Interface | DC Power Input + AV Composite Video Output |
Before you buy
- Four bands: 1.2 / 1.3 / 1.7 / 2.2 GHz. No 5.8 GHz — pairing it with a 5.8 GHz VTX gets you nothing.
- One antenna port covers the whole range, so the antenna has to be broadband or you lose range at the band edges.
- SMA female connector — use SMA male antennas; RP-SMA will thread on and not connect.
- Analog CVBS out — for goggles, monitors and DVRs, not HD systems.
- Pick the variant with cables if you do not already have the matching harness; the bare unit ships without them.
In the box
Package contents depend on selected variant:
- 1 × SK-VRX01 Multi-Band Receiver (with Connecting Cables) OR 1 × ANT-1G-2.3G Broadband Antenna
Why this spec
- Multi-Band Low-Frequency Reception: Covers 1.2GHz, 1.3GHz, 1.7GHz, and 2.2GHz bands, delivering superior diffraction and terrain clearance compared to 5.8GHz.
- 80 Selectable Channels: Comprehensive channel lineup ensures compatibility with various analog video transmitters.
- OLED Display & Nav Key: Easy channel selection, frequency fine-tuning, and signal monitoring via sharp OLED display and intuitive key navigation.
- Low-Signal Warning Alarm: Built-in acoustic buzzer warns pilots when RF signal quality drops near receiver noise floor.
- Standard AV Output: Feeds video directly to external monitors, ground station DVR recorders, or analog FPV goggle inputs.
What you still need to complete the build
- An ELRS transmitter or module
- A free UART on the flight controller
- Matching firmware major version on both ends
Support and returns
Covered against manufacturing defects for 12 months. If a unit arrives dead, loses its video lock or overheats at rated power, contact us with the order number and a short clip. Running it above the rated voltage, transmitting without an antenna, or crash damage are not covered.
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: SK-VRX01【Includes matching cables】; ANT-1G-2.3G Antenna. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
How do I check video-link compatibility?
Match the exact transmit and receive frequencies, channel table and video format. A similar band name or channel number does not guarantee interoperability.
Does every option include both a transmitter and a receiver?
Check the selected version and package contents. Do not assume a combined product photograph means a complete video-link set is included.
Will a higher power setting guarantee longer range?
No. Link performance depends on antennas, receiver sensitivity, installation, interference and operating conditions. Do not treat rated output power as a distance guarantee.
What should I check before powering a transmitter?
Verify the specified input voltage, polarity and cooling requirements, and connect a suitable antenna before operating a transmitter. Follow the exact model’s setup instructions.
Will it fit my goggles or flight controller?
Confirm the mechanical interface, signal format, supply and pinout with both devices. A product-family reference does not establish compatibility with every revision.