Beitian BT-960 / BT-980 / BT-982 Multi-Band GNSS RTK Modules
Multi-Band GNSS RTK Receiver Family
GNSS positioning modules for OEM UAV, surveying and robotics integration. Select the exact model variant for the intended positioning function.
- BT-960: single-antenna RTK positioning, supplier-rated up to 20 Hz
- BT-980: single-antenna RTK positioning, supplier-rated up to 50 Hz
- BT-982: dual-antenna RTK positioning and heading, supplier-rated up to 20 Hz
- Available F1/F2 configurations; module PCB footprint approximately 38 × 26 mm
- TTL serial interface; compatible antennas and cables available separately or as supplier-configured kits
Important: Centimeter-level accuracy requires suitable antennas, correction data and configuration. Confirm F1/F2 electrical differences, antenna quantity, included accessories and autopilot protocol compatibility before ordering. Some selectable options may be accessories rather than receiver modules.
What you still need
- A free UART on the flight controller
- A clear sky view on the mount
- Double-sided tape or a mast away from the VTX
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: BT-982F1(Dual-antenna positioning and direction finding20HZ ); BT-982F2(Dual-antenna positioning and direction finding20HZ); BT-980F1(Single-antenna positioning50HZ); BT-980F2(Single-antenna positioning50HZ); BT-960F1(Single-antenna positioning20HZ); BT-960F2(Single-antenna positioning20HZ); Consult customer service to select the appropriate antenna; Customized Contact Customer Service(Send the customized content to customer service). Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
Will this module connect directly to my flight controller?
Check supply voltage, logic levels, interface, connector pinout and supported protocol against the exact flight controller and firmware. Similar plugs do not establish compatibility.
Does the listing guarantee position accuracy?
No. Positioning performance depends on the selected module, antenna, satellite visibility, installation and operating mode. Use model-specific test conditions when evaluating accuracy.
Does an RTK-capable module provide corrected positioning by itself?
Confirm the selected model’s supported operating modes and required correction source, communication path and configuration. Do not assume correction service or base equipment is included.
How should I place the module?
Follow the manufacturer’s antenna orientation and mounting guidance. Keep it away from sources of electrical interference and verify reception and heading behavior before flight.