GX 13-Inch & 15-Inch Heavy-Lift Carbon Fiber Quadcopter Drone Frame Kit

GX 13-Inch & 15-Inch Heavy-Lift Carbon Fiber Quadcopter Drone Frame Kit

GX-13 13-Inch Carbon Fiber Frame
$44.04
Sale price  $44.04 Regular price  $44.04
Skip to product information
GX 13-Inch & 15-Inch Heavy-Lift Carbon Fiber Quadcopter Drone Frame Kit

GX 13-Inch & 15-Inch Heavy-Lift Carbon Fiber Quadcopter Drone Frame Kit

$44.04
Sale price  $44.04 Regular price  $44.04
Color

GX 13-inch and 15-inch carbon fiber quadcopter frame kit options for compatible multirotor builds. Select the frame size and whether 3D-printed parts are included. Confirm motor mounting, flight-controller mounting, and propeller clearance against the supplier drawings before ordering.

Key Information

  • Available variants: GX-13 or GX-15 frame, with or without additional 3D-printed parts.
  • Verify exact frame dimensions, mounting hole patterns, carbon-fiber grade, and payload limits with the supplier.

Specifications

Item Options
Model GX-13 / GX-15
Product type Carbon fiber quadcopter frame kit
Optional parts 3D-printed parts (select variant)
Mounting dimensions and load rating Supplier confirmation required

Package Contents

Frame kit in the selected GX-13 or GX-15 configuration. Additional 3D-printed parts are included only with variants explicitly labeled as such. Confirm the exact hardware and accessory list with the supplier.

What you still need

  • 4× motors
  • A flight stack (30.5×30.5 or 20×20)
  • Props matched to the arm length
  • VTX, camera and antenna
  • Battery

Frequently Asked Questions

How do I choose the correct version?

Available selections for this listing: GX-13 13-Inch Carbon Fiber Frame; GX-15 15-Inch Carbon Fiber Frame; GX-13 Frame + 3D-Printed Parts; GX-15 Frame + 3D-Printed Parts. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.

Is this a complete ready-to-fly drone?

Do not assume a frame listing includes motors, electronics, batteries or radio equipment. Use the selected configuration’s package list to establish what is supplied.

How do I check component fit?

Compare the frame’s exact mounting patterns, camera space, stack height, motor screw pattern and battery clearance with your components. A nominal frame or propeller size alone is not sufficient.

Will every version fit the same propellers?

Verify propeller clearance on the selected frame size and arm configuration, including clearance to the body and wiring. Do not apply one frame size’s clearances to another.

Are replacement arms and printed mounts interchangeable?

Confirm the frame revision, hole spacing and part dimensions. Similar model names do not guarantee that arms, plates or camera mounts interchange.

What should I check during assembly?

Confirm screw lengths and motor-winding clearance, secure wiring away from propellers and isolate exposed electrical contacts from conductive carbon fiber. Inspect the assembly before powering it.

You may also like