F722 Flight Controller & BLS 60A/80A/100A 4-in-1 ESC Stack (3-8S / 7-10" Drones)
F722 flight controller and optional 60A, 80A, or 100A 4-in-1 ESC stack configurations for FPV multirotor applications. Select either the standalone flight controller or the appropriate flight-controller/ESC combination. Verify the exact gyro chip, battery input range, firmware, continuous-current rating, and wiring pinout for the selected variant before installation.
Variant Information
- Standalone F722 flight-controller options and F722 + 4-in-1 ESC combinations are listed separately.
- ESC options are labeled 60A, 80A, or 100A; continuous and burst ratings require manufacturer verification.
- Gyro model naming differs between the supplier SKU and existing description and must be confirmed before shipment.
Specifications
| Parameter | Information |
|---|---|
| Flight-controller family | F722 |
| Available ESC options | 60A / 80A / 100A 4-in-1 (variant-dependent) |
| Gyroscope model | Supplier confirmation required |
| Input voltage, ESC firmware, current ratings, and mounting dimensions | Confirm against manufacturer specifications for selected variant |
Package Contents
Standalone flight controller or flight-controller/ESC stack according to the selected variant. Confirm included cables, capacitor, mounting hardware, and other accessories with the supplier.
What you still need
- 4× motors and a 4-in-1 ESC
- Receiver (ELRS/CRSF)
- VTX and camera
- GPS for rescue mode
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: F722 FC Only (PMU6500); F722 FC Only (ICM42866); F722 FC + 80A ESC Stack (3–8S); F722 FC + 100A ESC Stack (3–8S); F722 FC + 60A ESC Stack (3–8S). Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
Does every option include both a flight controller and an ESC?
No such assumption should be made. Check the selected option and package contents to distinguish standalone boards, ESCs and complete stacks.
How do I check the supported battery voltage?
Use the voltage range for the exact selected board or stack. For a stack, the usable input must stay within the limits of every connected component, not only the ESC.
Are matching-looking connectors plug-and-play?
Compare the pinout, voltage, ground, signal order and connector orientation on both devices. The same connector housing does not guarantee matching wiring.
Which firmware target should I use?
Use the manufacturer’s exact board revision and supported firmware target. Do not flash a target based solely on the processor name or a similar product title.
Is the current rating a guarantee for my installation?
No. Check whether the published value is continuous or burst, whether it applies per channel, and the required airflow and cooling conditions. Size the system using the actual motor and propeller load.
How should I perform initial setup?
Remove propellers, verify soldering and polarity, and follow the board manufacturer’s setup procedure. Check control direction, motor mapping and failsafe before flight.