F722 X8 Pro Flight Controller & 55A–80A 4-in-1 ESC Stack (3-6S / M1–M8 Octocopter)

F722 X8 Pro Flight Controller & 55A–80A 4-in-1 ESC Stack (3-6S / M1–M8 Octocopter)

F722 Flight Controller Only
$36.55
Sale price  $36.55 Regular price  $36.55
Skip to product information
F722 X8 Pro Flight Controller & 55A–80A 4-in-1 ESC Stack (3-6S / M1–M8 Octocopter)

F722 X8 Pro Flight Controller & 55A–80A 4-in-1 ESC Stack (3-6S / M1–M8 Octocopter)

$36.55
Sale price  $36.55 Regular price  $36.55
Color

The F722 X8 Pro Flight Controller and 55A–80A 4-in-1 ESC Stack is an industrial-grade flight management system engineered for high-performance freestyle, long-range cinematic rigs, and heavy-payload X8 octocopters. Built around an STM32F722RET6 processor with dual gyro compatibility (ICM42688 / BMI270) and an integrated SPL06-001 barometer, the F722 X8 Pro provides 8 dedicated motor outputs (M1–M8), 6 hardware UARTs, and a USER1-switched 12V BEC to remotely cycle power to video transmitters.

Specifications

Parameter Flight Controller (F722 X8 Pro) 4-in-1 ESC (55A / 65A / 80A)
MCU STM32F722RET6 (216MHz) High-speed ESC processor / BLHeli_S
Gyro / IMU ICM42688 or BMI270 N/A
Barometer SPL06-001 onboard N/A
Blackbox Memory 16MB onboard Flash N/A
Input Voltage 3–6S LiPo 3–6S LiPo
Continuous Current N/A 55A, 65A, or 80A per channel (burst up to 90A)
BEC Outputs 3.3V/300mA, 4.5V/500mA, 5V/3A, 12V/3A (USER1 switch) Integrated current telemetry / shunt
UART Ports 6 Hardware UARTs (UART1–UART6) + I2C ESC Telemetry Pad
Motor Outputs 8 Channels (M1–M8) 4 Motor outputs per board (stackable for 8-channel)
Mounting & Weight 30.5 × 30.5mm (M3) / 9.5g 30.5 × 30.5mm (M3)

Before you buy

  • Pick the ESC current for your prop, not for the label. 60 A is right for 5-inch on 6S; 80 A and 100 A are for 7-inch and heavy 6S builds where peak current per motor goes past 50 A.
  • 2–6S only. The board and the ESC stage are both rated to 6S; 8S input destroys them.
  • 30.5 × 30.5 mm stack mounting — confirm your frame arms use that pattern.
  • Check that the FC and ESC firmware match the pairing. F722 + BLHeli_S is the common combination; flashing BLHeli_32 firmware onto a BLHeli_S ESC bricks it.
  • Capacitor on the battery pads is not optional at 6S with long leads — voltage spikes on plug-in are what kills the ESC FETs.

In the box

Package contents depend on the selected variant (Standalone FC, Standalone ESC, or Combo Stack):

  • 1 × F722 X8 Pro Flight Controller (or Selected 4-in-1 ESC, or Combo Stack)
  • 1 × SH1.0 8-Pin ESC Connection Cable (with stack/ESC variants)
  • 1 × DJI HD Air Unit Connection Harness (with FC/stack variants)
  • 4 × Anti-Vibration Silicone Grommets (M3)
  • 1 × High-Frequency Low-ESR Filter Capacitor (with ESC/stack variants)
  • 1 × XT60 Power Cable (with ESC/stack variants)

Why this spec

  • STM32F722RET6 High-Speed Processor: Delivers rapid computation for complex flight algorithms, dual firmware compatibility (Betaflight & INAV), and zero telemetry lag.
  • Native 8-Motor (M1–M8) Architecture: Directly drives up to 8 motors for X8 cinelifters, octocopters, and custom multi-rotor configurations without external remapping.
  • Precision Altitude Sensing: Onboard SPL06-001 digital barometer enables accurate altitude hold and autonomous flight capabilities in INAV.
  • Switchable 12V/3A BEC: Remote USER1 power switching allows pilots to turn off power-hungry video transmitters on the bench or between flights.
  • Direct Digital HD Port: Plug-and-play socket compatible with DJI Air Unit, Caddx Vista, Walksnail Avatar, and HDZero systems.
  • High-Power ESC Options: Available with 55A, 65A, or 80A BLHeli_S 4-in-1 ESCs supporting Bi-directional DShot600 and RPM filtering.

What you still need to complete the build

  • 4× motors and a 4-in-1 ESC
  • Receiver (ELRS/CRSF)
  • VTX and camera
  • GPS for rescue mode

Support and returns

Covered against manufacturing defects for 12 months. If a board arrives dead, loses a UART or will not hold a flash, contact us with the order number and a short video of the fault. Reverse-polarity damage, solder bridges and crash damage are not covered.

Frequently Asked Questions

How do I choose the correct version?

Available selections for this listing: F722 Flight Controller Only; 55A 4-in-1 ESC Only; 65A 4-in-1 ESC Only; 80A 4-in-1 ESC Only; F722 FC + 55A ESC Stack; F722 FC + 65A ESC Stack; F722 FC + 80A ESC Stack. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.

Does every option include both a flight controller and an ESC?

No such assumption should be made. Check the selected option and package contents to distinguish standalone boards, ESCs and complete stacks.

How do I check the supported battery voltage?

Use the voltage range for the exact selected board or stack. For a stack, the usable input must stay within the limits of every connected component, not only the ESC.

Are matching-looking connectors plug-and-play?

Compare the pinout, voltage, ground, signal order and connector orientation on both devices. The same connector housing does not guarantee matching wiring.

Which firmware target should I use?

Use the manufacturer’s exact board revision and supported firmware target. Do not flash a target based solely on the processor name or a similar product title.

Is the current rating a guarantee for my installation?

No. Check whether the published value is continuous or burst, whether it applies per channel, and the required airflow and cooling conditions. Size the system using the actual motor and propeller load.

How should I perform initial setup?

Remove propellers, verify soldering and polarity, and follow the board manufacturer’s setup procedure. Check control direction, motor mapping and failsafe before flight.

You may also like