{"product_id":"f405-ft722flight-control-50a-60a-80a-electrically-adjustable-four-in-one-flying-tower-model-aircraft-drone-fpv-dji-phantom","title":"F405 \u0026 FT722 Flight Controller \/ 60A–100A 4-in-1 ESC Series (2-8S \/ 30.5x30.5mm)","description":"\u003cp\u003eThe F405 and FT722 Flight Controller and Heavy-Duty 4-in-1 ESC Series offers robust, high-voltage power distribution and precise flight stabilization for 5-inch freestyle drones through 10-inch commercial and cinematic UAV platforms. Featuring STM32F405 or high-speed FT722 flight controller options paired with 60A (2–6S), 80A (3–8S), or 100A (3–8S) BLHeli_S 4-in-1 ESCs, this hardware series delivers the thermal dissipation, current throughput, and filtering needed for demanding multi-rotor applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eComponent \/ Variant\u003c\/th\u003e\n      \u003cth\u003eInput Voltage\u003c\/th\u003e\n      \u003cth\u003eContinuous \/ Burst Current\u003c\/th\u003e\n      \u003cth\u003eProcessor \/ Firmware\u003c\/th\u003e\n      \u003cth\u003eKey Features\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e60A 4-in-1 ESC\u003c\/td\u003e\n      \u003ctd\u003e2–6S LiPo\u003c\/td\u003e\n      \u003ctd\u003e60A \/ 70A (10s)\u003c\/td\u003e\n      \u003ctd\u003eBLHeli_S (DShot600)\u003c\/td\u003e\n      \u003ctd\u003eStandard 30.5x30.5mm, Current Shunt Resistor\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e80A 4-in-1 ESC\u003c\/td\u003e\n      \u003ctd\u003e3–8S LiPo\u003c\/td\u003e\n      \u003ctd\u003e80A \/ 90A (10s)\u003c\/td\u003e\n      \u003ctd\u003eBLHeli_S (DShot600)\u003c\/td\u003e\n      \u003ctd\u003eHigh-voltage MOSFETs, Onboard TVS Diode\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e100A 4-in-1 ESC\u003c\/td\u003e\n      \u003ctd\u003e3–8S LiPo\u003c\/td\u003e\n      \u003ctd\u003e100A \/ 110A (10s)\u003c\/td\u003e\n      \u003ctd\u003eBLHeli_S (DShot600)\u003c\/td\u003e\n      \u003ctd\u003eHeavy copper power rails, Low ESR capacitors\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eF405 Flight Controller\u003c\/td\u003e\n      \u003ctd\u003e3–6S LiPo\u003c\/td\u003e\n      \u003ctd\u003eN\/A\u003c\/td\u003e\n      \u003ctd\u003eSTM32F405 \/ Betaflight\u003c\/td\u003e\n      \u003ctd\u003eDual BEC (5V\/9V), AT7456E OSD, Type-C USB\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFT722 Flight Controller\u003c\/td\u003e\n      \u003ctd\u003e3–6S LiPo\u003c\/td\u003e\n      \u003ctd\u003eN\/A\u003c\/td\u003e\n      \u003ctd\u003eSTM32F722 \/ Betaflight\u003c\/td\u003e\n      \u003ctd\u003e6 UARTs, ICM Gyro, SPL06 Barometer, 16MB Blackbox\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eBefore you buy\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix variants across two FCs and three ESCs\u003c\/strong\u003e — 60A is 2–6S, 80A and 100A are 3–8S. Mismatching the pack to the ESC variant is the most common mistake here.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eF405 vs FT722\u003c\/strong\u003e: the F722 gives you 6 UARTs, ICM gyro, SPL06 barometer and 16MB blackbox; the F405 is the cheaper baseline.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBLHeli_S \/ DShot600\u003c\/strong\u003e on all ESC variants — no BLHeli_32.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30.5 × 30.5 mm\u003c\/strong\u003e stack pattern across the range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBurst is only 10 seconds\u003c\/strong\u003e above continuous — do not tune to the burst number.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cp\u003e\u003cem\u003ePackage contents depend on the selected configuration (Standalone ESC or FC+ESC Stack Combo):\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × Standalone 4-in-1 ESC (60A, 80A, or 100A) OR 1 × Flight Controller + ESC Stack Combo\u003c\/li\u003e\n  \u003cli\u003e1 × SH1.0 8-Pin Wiring Interconnect Cable (with stack combos and standalone ESCs)\u003c\/li\u003e\n  \u003cli\u003e4 × Silicone Anti-Vibration Grommets (M3)\u003c\/li\u003e\n  \u003cli\u003e1 × Low-ESR Filter Capacitor (with ESCs and stack combos)\u003c\/li\u003e\n  \u003cli\u003e1 × Power Cable with XT60 Connector (with ESCs and stack combos)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy this spec\u003c\/h3\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlexible Processor Options:\u003c\/strong\u003e Choose between proven STM32F405 and ultra-responsive FT722 flight controllers equipped with Betaflight OSD and dual BEC outputs.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-Voltage \u0026amp; High-Current ESC Ratings:\u003c\/strong\u003e Available with 60A (2–6S LiPo), 80A (3–8S LiPo), or 100A (3–8S LiPo) continuous current capacity per motor channel.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeavy Copper Multi-Layer PCB:\u003c\/strong\u003e Multi-layer copper design and low internal resistance MOSFETs provide efficient heat dissipation under sustained full-throttle bursts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBroad Digital \u0026amp; Analog Compatibility:\u003c\/strong\u003e Dedicated wiring interfaces for DJI O3, Walksnail, HDZero, analog VTX systems, GPS modules, and external compasses.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard 30.5 × 30.5mm Layout:\u003c\/strong\u003e Universal mounting dimensions ensure seamless installation across standard FPV and cinematic drone frames.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you still need to complete the build\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4× motors and a 4-in-1 ESC\u003c\/li\u003e\n\u003cli\u003eReceiver (ELRS\/CRSF)\u003c\/li\u003e\n\u003cli\u003eVTX and camera\u003c\/li\u003e\n\u003cli\u003eGPS for rescue mode\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSupport and returns\u003c\/h3\u003e\u003cp\u003eCovered against manufacturing defects for 12 months. If a board arrives dead, loses a UART or will not hold a flash, contact us with the order number and a short video of the fault. Reverse-polarity damage, solder bridges and crash damage are not covered.\u003c\/p\u003e\n\u003csection class=\"rotorgear-faq\"\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I choose the correct version?\u003c\/h3\u003e\n\u003cp\u003eAvailable selections for this listing: 60A Four-in-one ESC2-6S; F405+60A; FT722+60A; 80A Four-in-one ESC3-8S; F405+80A; FT722+80A; 100A Four-in-one ESC3-8S. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.\u003c\/p\u003e\n\u003ch3\u003eDoes every option include both a flight controller and an ESC?\u003c\/h3\u003e\n\u003cp\u003eNo such assumption should be made. Check the selected option and package contents to distinguish standalone boards, ESCs and complete stacks.\u003c\/p\u003e\n\u003ch3\u003eHow do I check the supported battery voltage?\u003c\/h3\u003e\n\u003cp\u003eUse the voltage range for the exact selected board or stack. For a stack, the usable input must stay within the limits of every connected component, not only the ESC.\u003c\/p\u003e\n\u003ch3\u003eAre matching-looking connectors plug-and-play?\u003c\/h3\u003e\n\u003cp\u003eCompare the pinout, voltage, ground, signal order and connector orientation on both devices. The same connector housing does not guarantee matching wiring.\u003c\/p\u003e\n\u003ch3\u003eWhich firmware target should I use?\u003c\/h3\u003e\n\u003cp\u003eUse the manufacturer’s exact board revision and supported firmware target. Do not flash a target based solely on the processor name or a similar product title.\u003c\/p\u003e\n\u003ch3\u003eIs the current rating a guarantee for my installation?\u003c\/h3\u003e\n\u003cp\u003eNo. Check whether the published value is continuous or burst, whether it applies per channel, and the required airflow and cooling conditions. Size the system using the actual motor and propeller load.\u003c\/p\u003e\n\u003ch3\u003eHow should I perform initial setup?\u003c\/h3\u003e\n\u003cp\u003eRemove propellers, verify soldering and polarity, and follow the board manufacturer’s setup procedure. Check control direction, motor mapping and failsafe before flight.\u003c\/p\u003e\u003c\/section\u003e","brand":"RotorGear","offers":[{"title":"60A Four-in-one ESC2-6S","offer_id":68620546310450,"sku":"996570611806_60A-FOUR-IN-ONE-ESC2-6S","price":22.47,"currency_code":"USD","in_stock":true},{"title":"F405+60A","offer_id":68620571017522,"sku":"996570611806_F405+60A","price":45.83,"currency_code":"USD","in_stock":true},{"title":"FT722+60A","offer_id":68620571050290,"sku":"996570611806_FT722+60A","price":57.82,"currency_code":"USD","in_stock":true},{"title":"80A Four-in-one ESC3-8S","offer_id":68620571083058,"sku":"996570611806_80A-FOUR-IN-ONE-ESC3-8S","price":40.74,"currency_code":"USD","in_stock":true},{"title":"F405+80A","offer_id":68620571115826,"sku":"996570611806_F405+80A","price":65.31,"currency_code":"USD","in_stock":true},{"title":"FT722+80A","offer_id":68620571148594,"sku":"996570611806_FT722+80A","price":78.19,"currency_code":"USD","in_stock":true},{"title":"100A Four-in-one ESC3-8S","offer_id":68620571181362,"sku":"996570611806_100A-FOUR-IN-ONE-ESC3-8S","price":44.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1005\/1603\/6914\/files\/rg-unified-15487917982002-20261115-v1.png?v=1794675762","url":"https:\/\/rotorgearai.com\/products\/f405-ft722flight-control-50a-60a-80a-electrically-adjustable-four-in-one-flying-tower-model-aircraft-drone-fpv-dji-phantom","provider":"RotorGear","version":"1.0","type":"link"}