F405 & F722 Flight Controller with 60A / 80A / 100A 4-in-1 ESC Stacks (3-8S / 30.5x30.5mm)
The F405 and F722 Flight Controller Stacks paired with 60A, 80A, and 100A 4-in-1 ESCs are engineered for high-thrust 7-inch, 8-inch, 9-inch, and 10-inch multi-rotor drones requiring reliable, high-voltage operation. Featuring high-grade STM32 microcontrollers, integrated Betaflight OSD, and dedicated regulated power supplies for digital HD and analog video transmitters, these stacks offer exceptional noise immunity and high current handling under continuous heavy payloads.
Specifications
| Variant Stack | Flight Controller | ESC Current Rating | Input Voltage | Mounting Pattern |
|---|---|---|---|---|
| F405 + 60A Stack | STM32F405 (Betaflight) | 60A Continuous / 70A Burst | 3–6S LiPo | 30.5 × 30.5mm (M3) |
| F405 + 80A Stack | STM32F405 (Betaflight) | 80A Continuous / 90A Burst | 3–8S LiPo | 30.5 × 30.5mm (M3) |
| F722 + 60A Stack | STM32F722 (Betaflight) | 60A Continuous / 70A Burst | 3–6S LiPo | 30.5 × 30.5mm (M3) |
| F722 + 80A Stack | STM32F722 (Betaflight) | 80A Continuous / 90A Burst | 3–8S LiPo | 30.5 × 30.5mm (M3) |
| F722 + 100A Stack | STM32F722 (Betaflight) | 100A Continuous / 110A Burst | 3–8S LiPo | 30.5 × 30.5mm (M3) |
Before you buy
- Five stack variants: F405 or F722 with 60A / 80A / 100A. The 60A stacks are 3–6S, the 80A and 100A are 3–8S.
- F722 + 100A is the heavy 6S option — check that your frame and props actually need 100 A per motor before paying for it.
- betaflight targets differ between F405 and F722; flashing the wrong target bricks the board.
- 30.5 × 30.5 mm M3 mounting throughout.
- Burst ratings are 10-second figures — size the continuous number against your props.
In the box
- 1 × Flight Controller (F405 or F722 according to selected variant)
- 1 × 4-in-1 Brushless ESC (60A, 80A, or 100A according to selected variant)
- 1 × 8-Pin SH1.0 Connecting Cable
- 1 × Digital HD Video Transmitter Connection Harness
- 8 × M3 Silicone Anti-Vibration Grommets
- 1 × High-Capacity Low-ESR Filter Capacitor
- 1 × Heavy-Duty Power Cable with XT60 Connector
Why this spec
- Performance Processor Choices: Available with F405 for cost-effective reliability or F722 for high-speed calculation, extra UART peripherals, and fast telemetry handling.
- Heavy-Duty Current Ratings: Pairings with 60A (3–6S LiPo), 80A (3–8S LiPo), or 100A (3–8S LiPo) BLHeli_S ESCs built on low-resistance MOSFET arrays.
- Clean Regulated Power Rails: Onboard 5V and 9V/12V BEC circuits provide ripple-free power to FPV cameras, GPS modules, receivers, and digital video air units.
- Plug-and-Play Digital FPV Connectivity: Compatible with DJI O3, Caddx Vista, Walksnail Avatar, and HDZero via direct-plug cable harnesses.
- Vibration-Isolated Architecture: Standard 30.5 × 30.5mm mounting pattern fitted with silicone damping grommets to absorb mechanical motor vibrations.
What you still need to complete the build
- 4× motors and a 4-in-1 ESC
- Receiver (ELRS/CRSF)
- VTX and camera
- GPS for rescue mode
Support and returns
Covered against manufacturing defects for 12 months. If a board arrives dead, loses a UART or will not hold a flash, contact us with the order number and a short video of the fault. Reverse-polarity damage, solder bridges and crash damage are not covered.
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: 722+60A; 722+80A; 405+60A; 405+80A; F722+100A. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
Does every option include both a flight controller and an ESC?
No such assumption should be made. Check the selected option and package contents to distinguish standalone boards, ESCs and complete stacks.
How do I check the supported battery voltage?
Use the voltage range for the exact selected board or stack. For a stack, the usable input must stay within the limits of every connected component, not only the ESC.
Are matching-looking connectors plug-and-play?
Compare the pinout, voltage, ground, signal order and connector orientation on both devices. The same connector housing does not guarantee matching wiring.
Which firmware target should I use?
Use the manufacturer’s exact board revision and supported firmware target. Do not flash a target based solely on the processor name or a similar product title.
Is the current rating a guarantee for my installation?
No. Check whether the published value is continuous or burst, whether it applies per channel, and the required airflow and cooling conditions. Size the system using the actual motor and propeller load.
How should I perform initial setup?
Remove propellers, verify soldering and polarity, and follow the board manufacturer’s setup procedure. Check control direction, motor mapping and failsafe before flight.