{"product_id":"drone-flight-control-f4-v3s-plus-flying-tower-4electronic-speed-controller-60a-electronic-speed-controller-four-in-one-fpv-dji-phantom","title":"TSIDO F4 V3S PLUS Flight Controller \u0026 45A\/60A 4-in-1 ESC Stack","description":"\u003cp\u003eThe \u003cstrong\u003eTSIDO F4 V3S PLUS Stack\u003c\/strong\u003e is a reliable, high-value flight control and ESC solution designed for 5-inch and 7-inch FPV racing, freestyle quadcopters, and DIY multi-rotor platforms. Built on the classic STM32F405 flight controller architecture and paired with a high-current MAK4 4-in-1 electronic speed controller, it offers rock-solid performance across 3S to 6S power systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFlight Controller MCU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSTM32F405\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGyroscope\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSix-Axis Precision Sensor (MPU6000 \/ BMI270)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBarometer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIntegrated Onboard Barometer\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOSD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBetaflight OSD\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBlackbox\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMicroSD Card Slot\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInput Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3S – 6S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eESC Continuous Current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e45A or 60A (Selected Variant)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eESC Firmware \/ Protocol\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBLHeli_S \/ DShot300, DShot600\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting Pattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard 30.5 × 30.5 mm (M3)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eBefore you buy\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis listing sells five different things\u003c\/strong\u003e — FC only, 45A ESC only, 60A ESC only, and two stacks. Check which variant you are ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3S–6S only.\u003c\/strong\u003e 8S input destroys the FC regulator and the ESC stage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBLHeli_S \/ DShot300-600\u003c\/strong\u003e — no BLHeli_32 features. Bluejay gets you RPM filtering if you want it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30.5 × 30.5 mm M3\u003c\/strong\u003e stack pattern.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e45A vs 60A is per motor\u003c\/strong\u003e — four motors at 60A is 240A at the pack on punch-out; check your battery.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n  \u003cli\u003e1 × Selected Configuration (F4 V3S PLUS Flight Controller, MAK4 4-in-1 ESC, or Full Stack)\u003c\/li\u003e\n  \u003cli\u003e1 × 8-Pin SH1.0 ESC-to-FC Interconnect Cable\u003c\/li\u003e\n  \u003cli\u003e1 × XT60 Power Pigtail with 14AWG Silicone Wire\u003c\/li\u003e\n  \u003cli\u003e1 × 35V 1000μF Low-ESR Electrolytic Capacitor\u003c\/li\u003e\n  \u003cli\u003e1 × Anti-Vibration Silicone Grommet \u0026amp; M3 Standoff Hardware Kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy this spec\u003c\/h3\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProven F405 Architecture:\u003c\/strong\u003e STM32F405 processor delivers stable Betaflight flight performance with smooth filtering and responsive stick tracking.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeavy-Duty MAK4 4-in-1 ESC:\u003c\/strong\u003e Available in 45A or 60A continuous current ratings with BLHeli_S firmware, supporting DShot300 and DShot600 protocols.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOnboard OSD \u0026amp; MicroSD Blackbox:\u003c\/strong\u003e Integrated Betaflight analog OSD with a dedicated MicroSD card slot for high-resolution flight data logging.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVersatile Peripheral Support:\u003c\/strong\u003e Direct soldering pads and plug connectors for digital HD systems, analog VTX, telemetry receivers, buzzers, and programmable LED strips.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete Installation Hardware:\u003c\/strong\u003e Includes heavy-gauge 14AWG XT60 power leads, a 35V 1000μF low-ESR filter capacitor, and vibration-isolation standoffs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you still need to complete the build\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4× motors and a 4-in-1 ESC\u003c\/li\u003e\n\u003cli\u003eReceiver (ELRS\/CRSF)\u003c\/li\u003e\n\u003cli\u003eVTX and camera\u003c\/li\u003e\n\u003cli\u003eGPS for rescue mode\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSupport and returns\u003c\/h3\u003e\u003cp\u003eCovered against manufacturing defects for 12 months. If a board arrives dead, loses a UART or will not hold a flash, contact us with the order number and a short video of the fault. Reverse-polarity damage, solder bridges and crash damage are not covered.\u003c\/p\u003e\n\u003csection class=\"rotorgear-faq\"\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I choose the correct version?\u003c\/h3\u003e\n\u003cp\u003eAvailable selections for this listing: 60A 4-in-1 ESC Only; 45A 4-in-1 ESC Only; F4 V3S FC + 45A ESC Stack; F4 V3S FC + 60A ESC Stack; F4 V3S Flight Controller Only. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.\u003c\/p\u003e\n\u003ch3\u003eDoes every option include both a flight controller and an ESC?\u003c\/h3\u003e\n\u003cp\u003eNo such assumption should be made. Check the selected option and package contents to distinguish standalone boards, ESCs and complete stacks.\u003c\/p\u003e\n\u003ch3\u003eHow do I check the supported battery voltage?\u003c\/h3\u003e\n\u003cp\u003eUse the voltage range for the exact selected board or stack. For a stack, the usable input must stay within the limits of every connected component, not only the ESC.\u003c\/p\u003e\n\u003ch3\u003eAre matching-looking connectors plug-and-play?\u003c\/h3\u003e\n\u003cp\u003eCompare the pinout, voltage, ground, signal order and connector orientation on both devices. The same connector housing does not guarantee matching wiring.\u003c\/p\u003e\n\u003ch3\u003eWhich firmware target should I use?\u003c\/h3\u003e\n\u003cp\u003eUse the manufacturer’s exact board revision and supported firmware target. Do not flash a target based solely on the processor name or a similar product title.\u003c\/p\u003e\n\u003ch3\u003eIs the current rating a guarantee for my installation?\u003c\/h3\u003e\n\u003cp\u003eNo. Check whether the published value is continuous or burst, whether it applies per channel, and the required airflow and cooling conditions. Size the system using the actual motor and propeller load.\u003c\/p\u003e\n\u003ch3\u003eHow should I perform initial setup?\u003c\/h3\u003e\n\u003cp\u003eRemove propellers, verify soldering and polarity, and follow the board manufacturer’s setup procedure. Check control direction, motor mapping and failsafe before flight.\u003c\/p\u003e\u003c\/section\u003e","brand":"RotorGear","offers":[{"title":"60A 4-in-1 ESC Only","offer_id":68620512690482,"sku":"744318928601_60A-4-IN-1-ESC-ONLY","price":25.16,"currency_code":"USD","in_stock":true},{"title":"45A 4-in-1 ESC Only","offer_id":68620512756018,"sku":"744318928601_45A-4-IN-1-ESC-ONLY","price":22.76,"currency_code":"USD","in_stock":true},{"title":"F4 V3S FC + 45A ESC Stack","offer_id":68620512788786,"sku":"744318928601_F4-V3S-FC-45A-ESC-STACK","price":41.64,"currency_code":"USD","in_stock":true},{"title":"F4 V3S FC + 60A ESC Stack","offer_id":68620512821554,"sku":"744318928601_F4-V3S-FC-60A-ESC-STACK","price":44.64,"currency_code":"USD","in_stock":true},{"title":"F4 V3S Flight Controller Only","offer_id":68620512854322,"sku":"744318928601_F4-V3S-FLIGHT-CONTROLLER-ONL","price":20.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1005\/1603\/6914\/files\/rg-unified-15487917392178-20261115-v1.png?v=1794675760","url":"https:\/\/rotorgearai.com\/products\/drone-flight-control-f4-v3s-plus-flying-tower-4electronic-speed-controller-60a-electronic-speed-controller-four-in-one-fpv-dji-phantom","provider":"RotorGear","version":"1.0","type":"link"}