TSIDO F4 V3S PLUS Flight Controller & 45A/60A 4-in-1 ESC Stack

TSIDO F4 V3S PLUS Flight Controller & 45A/60A 4-in-1 ESC Stack

60A 4-in-1 ESC Only
$25.16
Sale price  $25.16 Regular price  $25.16
Skip to product information
TSIDO F4 V3S PLUS Flight Controller & 45A/60A 4-in-1 ESC Stack

TSIDO F4 V3S PLUS Flight Controller & 45A/60A 4-in-1 ESC Stack

$25.16
Sale price  $25.16 Regular price  $25.16
Color

The TSIDO F4 V3S PLUS Stack is a reliable, high-value flight control and ESC solution designed for 5-inch and 7-inch FPV racing, freestyle quadcopters, and DIY multi-rotor platforms. Built on the classic STM32F405 flight controller architecture and paired with a high-current MAK4 4-in-1 electronic speed controller, it offers rock-solid performance across 3S to 6S power systems.

Specifications

Flight Controller MCU STM32F405
Gyroscope Six-Axis Precision Sensor (MPU6000 / BMI270)
Barometer Integrated Onboard Barometer
OSD Betaflight OSD
Blackbox MicroSD Card Slot
Input Voltage 3S – 6S LiPo
ESC Continuous Current 45A or 60A (Selected Variant)
ESC Firmware / Protocol BLHeli_S / DShot300, DShot600
Mounting Pattern Standard 30.5 × 30.5 mm (M3)

Before you buy

  • This listing sells five different things — FC only, 45A ESC only, 60A ESC only, and two stacks. Check which variant you are ordering.
  • 3S–6S only. 8S input destroys the FC regulator and the ESC stage.
  • BLHeli_S / DShot300-600 — no BLHeli_32 features. Bluejay gets you RPM filtering if you want it.
  • 30.5 × 30.5 mm M3 stack pattern.
  • 45A vs 60A is per motor — four motors at 60A is 240A at the pack on punch-out; check your battery.

In the box

  • 1 × Selected Configuration (F4 V3S PLUS Flight Controller, MAK4 4-in-1 ESC, or Full Stack)
  • 1 × 8-Pin SH1.0 ESC-to-FC Interconnect Cable
  • 1 × XT60 Power Pigtail with 14AWG Silicone Wire
  • 1 × 35V 1000μF Low-ESR Electrolytic Capacitor
  • 1 × Anti-Vibration Silicone Grommet & M3 Standoff Hardware Kit

Why this spec

  • Proven F405 Architecture: STM32F405 processor delivers stable Betaflight flight performance with smooth filtering and responsive stick tracking.
  • Heavy-Duty MAK4 4-in-1 ESC: Available in 45A or 60A continuous current ratings with BLHeli_S firmware, supporting DShot300 and DShot600 protocols.
  • Onboard OSD & MicroSD Blackbox: Integrated Betaflight analog OSD with a dedicated MicroSD card slot for high-resolution flight data logging.
  • Versatile Peripheral Support: Direct soldering pads and plug connectors for digital HD systems, analog VTX, telemetry receivers, buzzers, and programmable LED strips.
  • Complete Installation Hardware: Includes heavy-gauge 14AWG XT60 power leads, a 35V 1000μF low-ESR filter capacitor, and vibration-isolation standoffs.

What you still need to complete the build

  • 4× motors and a 4-in-1 ESC
  • Receiver (ELRS/CRSF)
  • VTX and camera
  • GPS for rescue mode

Support and returns

Covered against manufacturing defects for 12 months. If a board arrives dead, loses a UART or will not hold a flash, contact us with the order number and a short video of the fault. Reverse-polarity damage, solder bridges and crash damage are not covered.

Frequently Asked Questions

How do I choose the correct version?

Available selections for this listing: 60A 4-in-1 ESC Only; 45A 4-in-1 ESC Only; F4 V3S FC + 45A ESC Stack; F4 V3S FC + 60A ESC Stack; F4 V3S Flight Controller Only. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.

Does every option include both a flight controller and an ESC?

No such assumption should be made. Check the selected option and package contents to distinguish standalone boards, ESCs and complete stacks.

How do I check the supported battery voltage?

Use the voltage range for the exact selected board or stack. For a stack, the usable input must stay within the limits of every connected component, not only the ESC.

Are matching-looking connectors plug-and-play?

Compare the pinout, voltage, ground, signal order and connector orientation on both devices. The same connector housing does not guarantee matching wiring.

Which firmware target should I use?

Use the manufacturer’s exact board revision and supported firmware target. Do not flash a target based solely on the processor name or a similar product title.

Is the current rating a guarantee for my installation?

No. Check whether the published value is continuous or burst, whether it applies per channel, and the required airflow and cooling conditions. Size the system using the actual motor and propeller load.

How should I perform initial setup?

Remove propellers, verify soldering and polarity, and follow the board manufacturer’s setup procedure. Check control direction, motor mapping and failsafe before flight.

You may also like