DF-V2 Carbon Fiber Long-Range Drone Frame Kit (8" / 9" / 10" / Arm Braces)
The DF-V2 Carbon Fiber Long-Range Drone Frame Kit is a heavy-duty aerial platform engineered for high-endurance mountain cruising, long-range reconnaissance, and cinematic payload carrying. Featuring rigid structural diagonal arm braces connecting front and rear arms, the DF-V2 eliminates torsional flexing and motor arm resonance across large 8-inch, 9-inch, and 10-inch propeller configurations.
Specifications
| Parameter | DF-V2 8 (8-Inch) | DF-V2 9 (9-Inch) | DF-V2 10 (10-Inch) |
|---|---|---|---|
| Supported Propeller Size | Up to 8 inches | Up to 9 inches | Up to 10 inches |
| Material | 3K Matte Carbon Fiber Plate | 3K Matte Carbon Fiber Plate | 3K Matte Carbon Fiber Plate |
| Arm Thickness | 5.0mm with Cross-Braces | 5.0mm with Cross-Braces | 5.0mm with Cross-Braces |
| Stack Mounting Pattern | 20×20mm & 30.5×30.5mm (M3) | 20×20mm & 30.5×30.5mm (M3) | 20×20mm & 30.5×30.5mm (M3) |
| Motor Mounting Pattern | 16×16mm & 19×19mm (M3) | 19×19mm (M3) | 19×19mm (M3) |
Before you buy
- Pick the size for your prop, not your preference: 8-inch frame clears 8-inch props, 10-inch clears 10-inch. Nothing larger fits.
- 5.0 mm arms with cross-braces — the braces are what stops long arms from flexing; do not fly without them fitted.
- Motor pattern changes: the 8-inch has 16 × 16 and 19 × 19, but 9-inch and 10-inch are 19 × 19 only.
- 3K matte carbon plate — matte finish shows scuffs less but is not more impact resistant than gloss.
- Stack fits 20 × 20 and 30.5 × 30.5, so both FC formats work.
In the box
- 1 × DF-V2 Carbon Fiber Frame Assembly (Selected 8", 9", or 10" Size)
- 1 × Set of Carbon Fiber Diagonal Arm Stiffening Braces
- 1 × Assembly Hardware Pack (Standoffs, Screws, Battery Strap)
- 1 × TPU 3D Printed Accessory Set (Included with '+Printed copy' variants)
Why this spec
- Reinforced Diagonal Arm Braces: Structural cross-bracing ties adjacent motor arms together to suppress vibration and maximize flight stability.
- Large Propeller Clearance: Available in 8-inch, 9-inch, and 10-inch arm geometries designed for high-efficiency low-KV power systems.
- Extended Fuselage Deck: Spacious top and bottom plates accommodate large high-capacity LiPo / Li-ion battery packs (4S–8S).
- Digital HD & Analog Compatibility: Direct mounting clearance for DJI O3 Air Unit, Caddx Vista, Walksnail Avatar, and long-range analog transmitters.
- Optional TPU Protection Pack: Includes antenna mounts, GPS protective seat, and arm tip landing pads.
What you still need to complete the build
- 4× motors
- A flight stack (30.5×30.5 or 20×20)
- Props matched to the arm length
- VTX, camera and antenna
- Battery
Support and returns
Covered against manufacturing defects for 12 months — delamination, mis-drilled holes and missing hardware. Contact us with the order number and photos of the fault for a replacement part. Crash damage and overtightened bolts are not covered.
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: DF-V2 8-Inch – Frame Only; DF-V2 8-Inch + Printed Parts; DF-V2 9-Inch – Frame Only; DF-V2 9-Inch + Printed Parts; DF-V2 10-Inch – Frame Only; DF-V2 10-Inch + Printed Parts. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
Is this a complete ready-to-fly drone?
Do not assume a frame listing includes motors, electronics, batteries or radio equipment. Use the selected configuration’s package list to establish what is supplied.
How do I check component fit?
Compare the frame’s exact mounting patterns, camera space, stack height, motor screw pattern and battery clearance with your components. A nominal frame or propeller size alone is not sufficient.
Will every version fit the same propellers?
Verify propeller clearance on the selected frame size and arm configuration, including clearance to the body and wiring. Do not apply one frame size’s clearances to another.
Are replacement arms and printed mounts interchangeable?
Confirm the frame revision, hole spacing and part dimensions. Similar model names do not guarantee that arms, plates or camera mounts interchange.
What should I check during assembly?
Confirm screw lengths and motor-winding clearance, secure wiring away from propellers and isolate exposed electrical contacts from conductive carbon fiber. Inspect the assembly before powering it.