BrotherHobby GOM 2207.5 Brushless Motor
The BrotherHobby GOM 2207.5 is a high-rpm brushless motor engineered for 5-inch freestyle and racing FPV quadcopters. Featuring a 7075 aluminum alloy bell, N52H curved neodymium magnets, Japanese NMB bearings, and a lightweight titanium alloy shaft.
Specifications
| Stator Size | 2207.5 |
| Configuration | 12N14P |
| Bell & Base Material | 7075 Aluminum Alloy |
| Shaft Material | Titanium Alloy Shaft, M5 Thread |
| Bearings | Japanese NMB 9×4×4 mm |
| Stator Lamination | 0.15mm Silicon Steel |
| Magnets | N52H Curved Neodymium |
| Motor Dimensions | Φ28.5mm × 33.9mm (14mm shaft length, 8mm thread) |
| Lead Wire | 20AWG Silicone Wire, 16cm (160mm) length |
| Rated Operating Voltage | 4S–6S LiPo |
| Base Mounting Pattern | 16×16mm (4× M3 on 16mm circle) |
| Available KV Options | 1750KV, 1920KV, 2500KV |
Before you buy
- 2207.5 is a 5-inch freestyle stator. 1750KV is 6S on 5-inch, 1920KV is 4S on 5-inch, 2500KV is 4S on lighter 5-inch or 3.5-inch props.
- Titanium shaft with M5 thread holds up better than aluminium at this size, but a crashed motor with a bent shaft is not covered.
- Japanese NMB 9×4×4 bearings are the reason to buy this over a generic 2207 — they last longer between rebuilds.
- 0.15 mm stator laminations reduce eddy losses, so expect slightly better efficiency at part throttle than a thicker-lamination motor of the same size.
- Mounting is 16 × 16 mm M3 — the standard 5-inch pattern.
In the box
- 1 × BrotherHobby GOM 2207.5 Brushless Motor
- 4 × M3 Mounting Screws
- 1 × M5 Flange Nut
Why this spec
- 7075 aluminum alloy bell and base with wear-resistant hard-anodized finish
- N52H curved neodymium magnets engineered for smooth, linear throttle curve
- Titanium alloy output shaft with standard M5 propeller adapter
- 0.15mm ultra-thin silicon steel stator laminations for reduced eddy-current losses
- Japanese NMB 9×4×4 mm bearings for smooth rotation and crash resistance
- Pre-installed 20AWG silicone lead wire (16cm length)
- Standard 16×16mm M3 bottom mounting pattern
Factory bench tests conducted with HQ 5.1×4.1×3 tri-blade nylon propellers on a 6S battery test stand (24.0V–23.8V, 10-second full throttle burst, 24.5°C–25.0°C ambient).
| KV Variant | Throttle (%) | Voltage (V) | Current (A) | RPM | Thrust (gf) | Input Power (W) | Efficiency (gf/W) | Internal Temp (10s) |
|---|---|---|---|---|---|---|---|---|
| 1750KV | 50% 100% |
24.0V 23.8V |
7.7A 41.2A |
17,087 29,571 |
546 gf 1,798 gf |
184.8W 980.6W |
2.95 gf/W 1.83 gf/W |
-- 93.7°C |
| 1920KV | 50% 100% |
24.0V 23.8V |
9.6A 48.9A |
18,308 31,109 |
648 gf 2,042 gf |
230.4W 1,183.8W |
2.81 gf/W 1.75 gf/W |
-- 147.0°C |
What you still need to complete the build
- A frame with the matching motor hole pattern
- ESCs or a 4-in-1 sized for the prop and cell count
- Props matched to the KV
- Locking compound for the motor screws
Support and returns
Covered against manufacturing defects for 12 months — bearings, windings and bell balance. If a motor arrives with a bent shaft, a rubbing bell or a dead phase, contact us with the order number and a photo and we replace it. Crash damage, burnt windings from a stalled prop and water ingress are not covered.
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: 1750KV; 1920KV; 2500KV. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
How do I choose the correct KV?
Choose the exact KV using motor test data for your intended battery voltage and propeller. KV alone does not determine thrust, efficiency or suitability for a particular aircraft.
Will this motor fit my frame and propeller?
Compare mounting-hole spacing, screw thread and depth, shaft or hub dimensions and available clearance with your frame and propeller. Similar stator sizes do not guarantee identical mounting.
How should I size the ESC and battery?
Use measured current for the selected motor, voltage and propeller combination, then check ESC thermal limits, battery current capability and connector ratings. Do not treat peak test figures as continuous-use guarantees.
Are thrust figures valid for every version?
No. Thrust and current depend on the exact KV, voltage, propeller and test conditions. Use only data that matches the selected configuration.
What should I check before the first run?
Verify screw clearance from the windings, secure the motor and wiring, and check rotation with propellers removed. Stop if there is binding, unusual vibration or abnormal heating.