BrotherHobby Avenger 3515 V5 370KV Brushless Motor for FPV Drones
The BrotherHobby Avenger 3515 V5 is a high-torque brushless motor engineered for 10-inch to 15-inch long-range FPV drones, heavy camera rigs, and high-endurance multicopters. Built with 7075 aluminum housings, curved arc neodymium magnets, and Japanese NMB bearings, it offers steady power output and reliable thermal dissipation.
Specifications
| Configuration | 12N14P |
| Available KV Ratings | 370KV / 520KV / 550KV / 680KV |
| Rated Voltage | 6S LiPo (refer to specific KV test data for multi-cell configurations) |
| Stator Dimensions | 35mm x 15mm |
| Shaft & Prop Thread | Hollow titanium alloy shaft / M5 thread |
| Mounting Pattern | M3 (19mm x 19mm) |
| Recommended Propellers | 11-inch to 15-inch carbon fiber & folding propellers |
Before you buy
- 3515 is a 11–15-inch long-range stator. 370KV is the 6S endurance choice, 520–550KV for 12–13-inch, 680KV for 11-inch.
- Rated 6S with 19 × 19 mm M3 mounting — check the frame arm pattern before ordering.
- Hollow titanium shaft / M5 thread — use a torque wrench on the prop nut; overtightening distorts the bell.
- Large props mean large current: size the ESC for peak, and expect the pack to be the limiting factor on a 15-inch build.
- These are not freestyle motors — the mass is in the stator, and crash loads go straight into the shaft.
In the box
- 1x BrotherHobby Avenger 3515 V5 Brushless Motor
- 4x M3 Mounting Screws
- 1x M5 Flanged Aluminum Lock Nut
Why this spec
- AL 7075 Construction: Precision-machined aluminum bell and base for structural rigidity under payload.
- Titanium Alloy Hollow Shaft: Minimizes weight while providing high yield and bending strength.
- Japanese NMB Bearings: Industrial-grade bearings for smooth rotation and consistent operational lifespan.
- High-Efficiency Stator: Kawasaki 0.2mm silicon steel stator laminations with N52H curved arc magnets.
- Quality Enamelled Windings: Heavy-gauge insulated copper windings engineered for thermal stability under sustained throttle.
What you still need to complete the build
- A frame with the matching motor hole pattern
- ESCs or a 4-in-1 sized for the prop and cell count
- Props matched to the KV
- Locking compound for the motor screws
Support and returns
Covered against manufacturing defects for 12 months — bearings, windings and bell balance. If a motor arrives with a bent shaft, a rubbing bell or a dead phase, contact us with the order number and a photo and we replace it. Crash damage, burnt windings from a stalled prop and water ingress are not covered.
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: 370KV; 520KV; 550KV; 680KV. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
How do I choose the correct KV?
Choose the exact KV using motor test data for your intended battery voltage and propeller. KV alone does not determine thrust, efficiency or suitability for a particular aircraft.
Will this motor fit my frame and propeller?
Compare mounting-hole spacing, screw thread and depth, shaft or hub dimensions and available clearance with your frame and propeller. Similar stator sizes do not guarantee identical mounting.
How should I size the ESC and battery?
Use measured current for the selected motor, voltage and propeller combination, then check ESC thermal limits, battery current capability and connector ratings. Do not treat peak test figures as continuous-use guarantees.
Are thrust figures valid for every version?
No. Thrust and current depend on the exact KV, voltage, propeller and test conditions. Use only data that matches the selected configuration.
What should I check before the first run?
Verify screw clearance from the windings, secure the motor and wiring, and check rotation with propellers removed. Stop if there is binding, unusual vibration or abnormal heating.