BrotherHobby Avenger 3110 730KV/900KV Brushless Motor for FPV Drones

BrotherHobby Avenger 3110 730KV/900KV Brushless Motor for FPV Drones

730KV
$25.76
Sale price  $25.76 Regular price  $25.76
Skip to product information
BrotherHobby Avenger 3110 730KV/900KV Brushless Motor for FPV Drones

BrotherHobby Avenger 3110 730KV/900KV Brushless Motor for FPV Drones

$25.76
Sale price  $25.76 Regular price  $25.76
Size

The BrotherHobby Avenger 3110 is a brushless motor designed for 7-inch to 11-inch long-range FPV cruisers, cinematic platforms, and multi-rotor builds. Featuring an AL 7075 aluminum bell casing, a titanium alloy hollow shaft, and Japanese NMB bearings, it offers smooth throttle response and efficient cruising capabilities.

Specifications

Configuration 12N14P
Available KV Ratings 730KV / 900KV
Rated Voltage 6S LiPo
Stator Dimensions 31mm x 10mm
Shaft & Prop Thread Hollow titanium alloy shaft / M5 thread
Mounting Pattern M3 (19mm x 19mm)
Recommended Propellers 7-inch to 11-inch propellers (e.g., HQ 9x5, HQ 10x5, GF 11x7 based on test bench data)

Before you buy

  • 730KV for 6S on 9–10-inch props, 900KV for 6S on 8-inch. Higher KV on the same prop pulls more current and runs hotter.
  • 3110 stator is a heavy-lift size — expect best efficiency in the 30–50 % throttle band, not at full throttle.
  • Mounting is 19×19 mm M3, so confirm the frame arm has that pattern before ordering.
  • Use a 4-in-1 ESC rated for the total, not the per-motor figure: four motors × peak amps is what the ESC sees.

In the box

  • 1x BrotherHobby Avenger 3110 Brushless Motor
  • 4x M3 Mounting Screws
  • 1x M5 Aluminum Flanged Lock Nut

Why this spec

  • AL 7075 Bell & Base: Aircraft-grade aluminum alloy casing for strength and crash resilience.
  • Titanium Alloy Hollow Shaft: Minimizes rotating mass while ensuring structural integrity.
  • Japanese NMB Bearings: Provides smooth, low-friction operation across all throttle ranges.
  • 0.2mm Kawasaki Silicon Steel Stator: Low core loss design for improved motor efficiency and thermal control.
  • N52H Curved Magnets: Consistent magnetic air gap for linear torque delivery.

What you still need to complete the build

  • A frame with the matching motor hole pattern
  • ESCs or a 4-in-1 sized for the prop and cell count
  • Props matched to the KV
  • Locking compound for the motor screws

Support and returns

Covered against manufacturing defects for 12 months — bearings, windings and bell balance. If a motor arrives with a bent shaft, a rubbing bell or a dead phase, contact us with the order number and a photo and we replace it. Crash damage, burnt windings from a stalled prop and water ingress are not covered.

Frequently Asked Questions

How do I choose the correct version?

Available selections for this listing: 730KV; 900KV. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.

How do I choose the correct KV?

Choose the exact KV using motor test data for your intended battery voltage and propeller. KV alone does not determine thrust, efficiency or suitability for a particular aircraft.

Will this motor fit my frame and propeller?

Compare mounting-hole spacing, screw thread and depth, shaft or hub dimensions and available clearance with your frame and propeller. Similar stator sizes do not guarantee identical mounting.

How should I size the ESC and battery?

Use measured current for the selected motor, voltage and propeller combination, then check ESC thermal limits, battery current capability and connector ratings. Do not treat peak test figures as continuous-use guarantees.

Are thrust figures valid for every version?

No. Thrust and current depend on the exact KV, voltage, propeller and test conditions. Use only data that matches the selected configuration.

What should I check before the first run?

Verify screw clearance from the windings, secure the motor and wiring, and check rotation with propellers removed. Stop if there is binding, unusual vibration or abnormal heating.

You may also like