{"product_id":"brotherhobby-avenger-2812-v3-crossing-motor-violent-race-fpv-uavcmmdr","title":"BrotherHobby Avenger 2812 V3 Brushless Motor","description":"\u003cp\u003eThe BrotherHobby Avenger 2812 V3 is a high-torque brushless motor tailored for 8- to 10-inch long-range, cinematic, and heavy-payload multirotors. Built with a 12N14P configuration, 0.2mm silicon steel laminations, 7075 aluminum bell housing, and wide 5S–8S voltage capability.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStator Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2812 (28mm diameter × 12mm height)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConfiguration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12N14P\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStator Lamination\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.2mm Silicon Steel Sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBell \u0026amp; Base Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7075 Aluminum Alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShaft Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTitanium Alloy Hollow Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput Shaft Thread\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eM5\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMagnets\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eN52H Curved Neodymium\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBearings\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJapanese NMB 12×6×4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMotor Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eΦ33.9mm × 42.0mm (16mm shaft length, 8.5mm thread)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMotor Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e76.5g (including wires)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLead Wire\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18AWG Silicone Wire, 25cm (250mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRated Operating Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5S–8S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBase Mounting Pattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e19×19mm (4× holes on 19mm circle)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable KV Options\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e900KV, 1115KV\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eBefore you buy\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2812 at 900KV or 1115KV, rated 5S–8S\u003c\/strong\u003e — 900KV for 6S on 7-inch endurance, 1115KV for 6S on 6-inch or 5S on 7-inch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e76.5 g with 250 mm 18AWG wire\u003c\/strong\u003e — a mid-weight 7-inch motor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.2 mm stator laminations\u003c\/strong\u003e reduce eddy losses compared with 0.35 mm, which is why the efficiency is good at part throttle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e19 × 19 mm M3 mounting, M5 prop thread, 8.5 mm thread length\u003c\/strong\u003e — check prop hub thickness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJapanese NMB 12×6×4 bearings\u003c\/strong\u003e — replaceable, and worth replacing rather than discarding a motor when they wear.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n  \u003cli\u003e1 × BrotherHobby Avenger 2812 V3 Brushless Motor\u003c\/li\u003e\n  \u003cli\u003e4 × Mounting Screws\u003c\/li\u003e\n  \u003cli\u003e1 × M5 Flange Nut\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy this spec\u003c\/h3\u003e\u003cul\u003e\n  \u003cli\u003e12N14P configuration with 0.2mm high-efficiency silicon steel laminations\u003c\/li\u003e\n  \u003cli\u003e7075 aluminum alloy bell and base with hard anodizing for scratch and wear resistance\u003c\/li\u003e\n  \u003cli\u003eTitanium alloy hollow shaft with standard M5 output thread\u003c\/li\u003e\n  \u003cli\u003eJapanese NMB 12×6×4 mm bearings for smooth operation and durability\u003c\/li\u003e\n  \u003cli\u003eN52H curved neodymium magnets\u003c\/li\u003e\n  \u003cli\u003e18AWG high-strand silicone lead wire (25cm length)\u003c\/li\u003e\n  \u003cli\u003eWide 5S–8S LiPo operational voltage range\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cp\u003e\u003cem\u003eBench tests conducted with 9.0×4.7 carbon fiber 2-blade propellers on a 6S battery bench platform (29°C–31°C ambient, 2 minutes at 100% throttle).\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eKV Variant\u003c\/th\u003e\n      \u003cth\u003eThrottle (%)\u003c\/th\u003e\n      \u003cth\u003eVoltage (V)\u003c\/th\u003e\n      \u003cth\u003eCurrent (A)\u003c\/th\u003e\n      \u003cth\u003eRPM\u003c\/th\u003e\n      \u003cth\u003eThrust (gf)\u003c\/th\u003e\n      \u003cth\u003eInput Power (W)\u003c\/th\u003e\n      \u003cth\u003eEfficiency (gf\/W)\u003c\/th\u003e\n      \u003cth\u003eMotor Temp (2 min)\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e900KV\u003c\/td\u003e\n      \u003ctd\u003e50%\u003cbr\u003e100%\u003c\/td\u003e\n      \u003ctd\u003e24.0V\u003cbr\u003e23.8V\u003c\/td\u003e\n      \u003ctd\u003e5.9A\u003cbr\u003e33.8A\u003c\/td\u003e\n      \u003ctd\u003e9,238\u003cbr\u003e16,416\u003c\/td\u003e\n      \u003ctd\u003e780 gf\u003cbr\u003e2,750 gf\u003c\/td\u003e\n      \u003ctd\u003e141.6W\u003cbr\u003e804.4W\u003c\/td\u003e\n      \u003ctd\u003e5.51 gf\/W\u003cbr\u003e3.42 gf\/W\u003c\/td\u003e\n      \u003ctd\u003e--\u003cbr\u003e97.8°C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e1115KV\u003c\/td\u003e\n      \u003ctd\u003e50%\u003cbr\u003e100%\u003c\/td\u003e\n      \u003ctd\u003e24.0V\u003cbr\u003e23.7V\u003c\/td\u003e\n      \u003ctd\u003e10.1A\u003cbr\u003e54.5A\u003c\/td\u003e\n      \u003ctd\u003e10,949\u003cbr\u003e18,768\u003c\/td\u003e\n      \u003ctd\u003e1,090 gf\u003cbr\u003e3,520 gf\u003c\/td\u003e\n      \u003ctd\u003e242.4W\u003cbr\u003e1,291.6W\u003c\/td\u003e\n      \u003ctd\u003e4.50 gf\/W\u003cbr\u003e2.73 gf\/W\u003c\/td\u003e\n      \u003ctd\u003e--\u003cbr\u003e92.6°C\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat you still need to complete the build\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA frame with the matching motor hole pattern\u003c\/li\u003e\n\u003cli\u003eESCs or a 4-in-1 sized for the prop and cell count\u003c\/li\u003e\n\u003cli\u003eProps matched to the KV\u003c\/li\u003e\n\u003cli\u003eLocking compound for the motor screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSupport and returns\u003c\/h3\u003e\u003cp\u003eCovered against manufacturing defects for 12 months — bearings, windings and bell balance. If a motor arrives with a bent shaft, a rubbing bell or a dead phase, contact us with the order number and a photo and we replace it. Crash damage, burnt windings from a stalled prop and water ingress are not covered.\u003c\/p\u003e\n\u003csection class=\"rotorgear-faq\"\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I choose the correct version?\u003c\/h3\u003e\n\u003cp\u003eAvailable selections for this listing: 1115KV; 900KV. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.\u003c\/p\u003e\n\u003ch3\u003eHow do I choose the correct KV?\u003c\/h3\u003e\n\u003cp\u003eChoose the exact KV using motor test data for your intended battery voltage and propeller. KV alone does not determine thrust, efficiency or suitability for a particular aircraft.\u003c\/p\u003e\n\u003ch3\u003eWill this motor fit my frame and propeller?\u003c\/h3\u003e\n\u003cp\u003eCompare mounting-hole spacing, screw thread and depth, shaft or hub dimensions and available clearance with your frame and propeller. Similar stator sizes do not guarantee identical mounting.\u003c\/p\u003e\n\u003ch3\u003eHow should I size the ESC and battery?\u003c\/h3\u003e\n\u003cp\u003eUse measured current for the selected motor, voltage and propeller combination, then check ESC thermal limits, battery current capability and connector ratings. Do not treat peak test figures as continuous-use guarantees.\u003c\/p\u003e\n\u003ch3\u003eAre thrust figures valid for every version?\u003c\/h3\u003e\n\u003cp\u003eNo. Thrust and current depend on the exact KV, voltage, propeller and test conditions. Use only data that matches the selected configuration.\u003c\/p\u003e\n\u003ch3\u003eWhat should I check before the first run?\u003c\/h3\u003e\n\u003cp\u003eVerify screw clearance from the windings, secure the motor and wiring, and check rotation with propellers removed. Stop if there is binding, unusual vibration or abnormal heating.\u003c\/p\u003e\u003c\/section\u003e","brand":"RotorGear","offers":[{"title":"1115KV","offer_id":68621317079346,"sku":"947966133092_1115KV","price":26.36,"currency_code":"USD","in_stock":true},{"title":"900KV","offer_id":68621335232818,"sku":"947966133092_900KV","price":26.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1005\/1603\/6914\/files\/rg-unified-15487925453106-20261115-v3.png?v=1794710615","url":"https:\/\/rotorgearai.com\/products\/brotherhobby-avenger-2812-v3-crossing-motor-violent-race-fpv-uavcmmdr","provider":"RotorGear","version":"1.0","type":"link"}