5.8GHz 3W Long-Range FPV Video Transmitter – Active Cooling, 5V
3W 5.8GHz is a high-power analog video transmitter for long-range work where a standard 25mW–600mW unit runs out of link. An active cooling fan keeps the PA stage from cooking itself when you are stationary on the bench.
Specifications
| Frequency | 5.8 GHz |
| Output power | 3 W |
| Input voltage | 5 V |
| Current draw | ≈0.5 A |
| Cooling | Active fan |
| Antenna connector | SMA |
| Video input | Analog CVBS |
| Mounting | 30.5×30.5 mm |
Before you buy
- 3W is not legal everywhere. Many countries cap analog VTX output at 25mW (EU) or require an amateur licence. Check your local rules before transmitting.
- Never power up without an antenna. Running a 3W VTX with no load destroys the amplifier within seconds.
- 5V input only. Do not feed it from a 6S pack directly — take 5V from the flight controller or a BEC.
- Analogue only. Pair it with a CVBS camera (e.g. Firefly Mini or Caddx Farsight).
In the box
- 1 × VTX
- Cable harness (antenna not included on base variant)
Why this spec
- 3W is roughly 6 dB over a 750 mW unit — that is double the usable range in free space, which is what lets you keep the link when you drop behind a ridge.
- The PA stage is heatsinked to the case and paired with an active fan: a 3W module without forced air will thermally fold back within minutes on the bench.
- Power is selectable, so you can run 25 mW for bench testing and pit mode, then switch to 3W at the field — you do not have to unplug the VTX to be legal at an event.
- Standard 5.8 GHz channels with a clean SMA output; no proprietary protocol, works with any analog goggle or VRX.
What you still need to complete the build
- 1× FPV camera
- 1× 5.8 GHz antenna (SMA)
- 5V/9V BEC or FC pad
- Goggles or VRX
- Cooling airflow — do not bench-test without a fan
We stock every line above — order them together and the parts are matched, not guessed.
Support and returns
Every unit is checked before dispatch. If a part arrives damaged or does not match the specification table above, contact us with your order number and a photo and we will replace it. Consumables (props, antennas) are covered for manufacturing defects, not crash damage.
Frequently Asked Questions
How do I choose the correct version?
Available selections for this listing: Image transmission transmitter; Image transmission transmitter+Original antenna. Select the exact configuration required for your build; specifications for one selection do not automatically apply to the others.
How do I check video-link compatibility?
Match the exact transmit and receive frequencies, channel table and video format. A similar band name or channel number does not guarantee interoperability.
Does every option include both a transmitter and a receiver?
Check the selected version and package contents. Do not assume a combined product photograph means a complete video-link set is included.
Will a higher power setting guarantee longer range?
No. Link performance depends on antennas, receiver sensitivity, installation, interference and operating conditions. Do not treat rated output power as a distance guarantee.
What should I check before powering a transmitter?
Verify the specified input voltage, polarity and cooling requirements, and connect a suitable antenna before operating a transmitter. Follow the exact model’s setup instructions.
Will it fit my goggles or flight controller?
Confirm the mechanical interface, signal format, supply and pinout with both devices. A product-family reference does not establish compatibility with every revision.